This water inlet valve is usually located behind the lower kickplate panel in either the right or left corner of the dishwasher. The attaching solenoids on the valve open and close according to the desired amount of water needed. The water inlet valve on your dishwasher supplies water to the dishwasher. If your dishwasher is leaking because it has overflowed, the water inlet valve may be the cause. If your dishwasher continues to fill above the heating element, try opening the door latch to see if it stops filling. If it continues to fill, you have a defective inlet valve that will need to be replaced.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Dishwasher Water Inlet Valve - 120V 60Hz
Troubleshooting
This part fixes the following symptoms:
Leaking | Will not fill with water | Not cleaning dishes properly | Not draining
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Thomas R - September 20, 2023
Verified Purchase
Easy install
Perfect part, easy install and no water problems
★★★★★
★★★★★
Bruce L - March 19, 2023
Verified Purchase
Followed directions and it worked.
I had a leak, I went to PartSelect, ordered the part, followed the directions to install the part, and it works. It was that simple!
★★★★★
★★★★★
Marie G - November 17, 2021
Verified Purchase
Part fit perfectly
The part came on time and fit perfectly. Dishwasher up and running.
★★★★★
★★★★★
Terry S - February 28, 2021
Verified Purchase
Easy repair!
Exact part I needed and install was easy.
★★★★★
★★★★★
Charles B - February 19, 2021
Verified Purchase
great job
Exactly what I needed and was easy to install. Website was super easy to use
Thanks for making everything old geezer proof.
★★★★★
★★★★★
Laurence B - November 12, 2020
Verified Purchase
worked as expected
replacement was not easy in the cramped space the valve is in
★★★★★
★★★★★
Christopher M - September 10, 2020
Verified Purchase
Fit perfectly
Fast shipping
★★★★★
★★★★★
Mike O - August 25, 2020
Verified Purchase
Exact fit
Very happy with part. Definitely recommend for all your parts needs
★★★★★
★★★★★
Davis R - August 16, 2020
Verified Purchase
Perfect Match
easy to install and fit great
★★★★★
★★★★★
Shawn W - July 13, 2020
Verified Purchase
Easy repair, great video.
Great product
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 29 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dishwasher overflowed when it was not running.
My husband had the water shut off to the dishwasher, he unplugged the electrical connection then disconnected the inlet water pipe with an adjustable wrench. Once that was done he disconnected the water inlet valve from the frame of the dishwasher and installed the new one , he then reconnected the inlet water pipe and the electrical conn
... Read moreection , once that was done he opened the water valve feeding the dishwasher and checked for leaks which were none. Took him about 15 minutes to do it . Make sure you have the proper tools and a roll of Teflon tape before you start the job.
Read less
Ellen from BERGENFIELD, NJ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaky water inlet valve
The Inlet valve was leaking. I removed the old valve in less than 30 min.Note: need bright flashlight! It could have been quicker but I had to lie on the floor and squeeze my big hands under the opening (kick panel). Once I got the two small bolts out, I was able to manipulate the valve out from under the dishwasher, then I carefully remo
... Read moreved the two lines. I received the part in 5 days and installed it in 45 minutes. It could have been a faster installation, however I was not about to pull out the whole dishwasher. Again, I was able to manipulate the new valve back in & tighten then test everything.(note: need a bright flashlight to see underneath) I immediately ran a load of dishes and Presto! No leaks and runs like a Swiss watch!
Read less
bret from REDWOOD CITY, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
leak at water control valve
Completly disconnected and layed dishwasher on its side for better access. New valve support was 1 inch longer than original but created no problem. it took no more than 30 min. to complete job.
Michael from CASA GRANDE, AZ
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Wrench (Adjustable), Wrench set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No water in Dishwasher
Removed kick plate at lower front of unit. At lower left is water inlet valve. Measured voltage across inlet valve solenoid at start of cycle. Was getting 120V to solenoid, but solenoid not opening valve thus no water going into dishwasher. Ordered replacement inlet valve. To remove inlet valve, disconnect two wires from valve assembly, d
... Read moreisconnect water supply tube and remove two screws from mounting bracket. Now you can remove water hose that goes to dishwasher. Reverse order for install of new valve assy.
Read less
Jimmy from Covington, LA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dishwasher was leaking
Located where the dishwasher was leaking from and by referencing the parts catalog determined that it was the water valve. I ordered the part from Parts select and replaced the part when it arrived. Replacing the part was very easy and I now have a working dishwasher again.
Victor from Upland, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable), Wrench set
3 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher ran through cycle but no water ever entered the washer.
Turned off water & pulled plug from electrical outlet. Two screws removed the lower cover, two more screws hidden behind the opened door allowed the removal of the bottom panel. Laid a towel under the valve on the lower left to catch water & disconnected the inlet fitting with a 1/2" wrench. Remove the two screws holding water inlet valve
... Read more next. With valve loose, remove electrical connector and drain hose (pliers). Valve has an elbow fitting that will need to be removed and installed on new valve - use Teflon tape or paste for a leak-free assembly. Reattach the drain hose & electrical connector before installing the valve using the two screws. Once in place, re-attach the inlet fitting (no Teflon required on tapered seats) and make sure everything is tight. Test washer through one cycle for water flow and no leaks. If all is good, remove towel and tools, then re-install the two lower panels. Clean up and you are done!
Read less
Ronald from Chardon, OH
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench set
2 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leaking from inlet valve
Easy as pie. Just turned off water and electricity. Disconnected hoses and wires and replaced with the new valve.
Amy from Staunton, VA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
7 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no water entering the dishwasher
turned off electricity, pulled dishwasher out about a foot, turned off water too dishwasher, removed inlet valve and replaced it with new.
Douglas from Lakewood, WA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable)
5 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the valve stuck closed - no water would enter the machine
remove vanity panel disconnect copper supply line from valve remove valve mounting screws rotate valve to access hose clamp loosen clamp and slide up rubber tubing about 2 inches pull hose off barbed fitting and remove old valve reverse order with new valve
Richard from Fox River Grove, IL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Wrench set
10 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No water during wash cycle, steam only
After checking various forums and advice, the suggested repair was a new water inlet valve. It was easy to change but I wasted $30 as it did not cure the problem. Dishwasher is only 2 years old and is cheaper to replace then have someone come and look at it. So it did not fix the problem, but I recommend Parts Select, the price was fair a
... Read morend part arrived very quickly.
Read less
ANDREW from APPLETON, WI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set
1 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
21 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Greg
February 19, 2018
The dishwasher had not been running for a few days. I noticed water dripping in the basement and it appears that is coming from the water inlet valve. Is this repairable or does it need to be replaced?
For model number Fghd2465nf0a
Hi Greg,
Thank you for your question. If there is water leaking from the water inlet valve, you will need to replace it. There is a video listed with the water inlet valve on our website that you may reference on how to install it. I hope this helps. Thank you and have a great day!
26 people found this helpful.
Was this helpful?
Thank you for voting!
Dean
October 25, 2017
My dishwasher overflowed check the float switch it is good, how can i be sure i need to replace my inlet valve. Thanks
For model number FDB4315LFC1
Hi Dean,
Thank you for your question. You would be able to test your water inlet valve with a multi meter to see if it is malfunctioning or not. When testing your valve, if your meter does not change at all that means that your part has no continuity and will need to be replaced. Good luck with your repair.
11 people found this helpful.
Was this helpful?
Thank you for voting!
Miguel
November 1, 2017
The continuity reading on my intake valve is 1221-1234. From my quick online research that is moderate resistance but too high for this application. What is the range for adequate functioning of this part?
For model number PLDB998AC1
Hi Miguel,
Thank you for your question. Actually your water inlet valve should show a reading between 500 - 1500 ohms. So with those readings, your valve is working fine. I hope that helps. Good luck with your repair.
8 people found this helpful.
Was this helpful?
Thank you for voting!
Lyman
March 5, 2018
Every time we close the door on our Frigidaire dishwasher it fills with water. It stops when the door is open. But will continuously fill with water anytime the door is closed. What could the problem be?
For model number FGHD2465NF1A
Hello Lyman, thank you for your question. The first part you will want to check in this kind of situation is the water fill valve. It sounds like the water valve is stuck in an open position. Checking a water valve is very easy. Use your multitester to test the valve for continuity. Set the device to the ohms setting x 1. Touch each of the meter's probes to a terminal. If you receive a reading of infinity, it means the valve's solenoid is faulty and the valve needs to be replaced. If your valve has two solenoids (four terminals), test the second pair of terminals in the same manner. If either pair of terminals receives a result of infinity, replace the water inlet valve. You do not have to remove the water inlet valve from the dishwasher in order to test it. Just make sure power is not getting to your dishwasher before you conduct the test. If the valve is not faulty, the issue is most likely the control board, as that board is what runs the cycles on the unit and acts like a timer, it could be stuck in a fill setting The water valve for your appliance is part number 154637401 and the board is part number 154886103. I hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Lourdes
September 20, 2019
The dishwasher seems to be working and running full cycles however. No water is coming in. I have removed all traps and cleaned them out again. Still nothing. Could it be the inlet valve not allowing water in?
For model number FDB956RBC0
Hello Lourdes, Thank you for the question. In most cases if no water is filling the tub, the water inlet valve would need to be replaced. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Harold
December 13, 2019
What water valve fits this dishwasher
For model number wdb664rbro
Hello Harold, Thank you for the question. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Joe
January 2, 2018
Water in the glass filter doesn't drain out a little water remains
For model number FDB421RFR4
Hi Joe, Thank you for the question.I suggest cleaning the filter,pump and drain hose. Make sure there is no blockage. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Randy
January 16, 2018
My appears to be leaking where the rubber water hose that runs into the dishwasher attaches to the inlet. I have tried a different style of clamp and it still leaks. Will changing the inlet valve solve this issue?
For model number FFBD2406NS10B
Hello Randy, Thank you for your inquiry. Yes, that should fix the issue. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bill
May 28, 2019
Just purchased a Frigidaire dishwasher...water inlet valve is plastic with an outside thread..looks like a plastic plug inside valve..does the plastic plug have to come out ??
For model number ffcd2413us
Hello Bill, Thank you for the question. The manufacture has not stated there is a removable plug for the valve. You should be able to install it as is. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jannell
February 11, 2020
Why would the top not spin.
For model number fdb510lcs0
Hi Jannell,
Thank you for your question. If the upper spray arm is not turning, then it is likely clogged with debris and it will need to be cleaned. To clean the spray arm, remove it from the dishwasher and place it in a solution of dishsoap, 1 cup of vinegar and warm water and let it soak until the debris has loosened. If there are mineral deposits from hard water, soak it in vinegar. Use an old toothbrush, or other scrubbers to clean the surfaces of the arm. Also, use toothpicks or some other tool that you can use to remove any build up from the holes. Once the arm has been thoroughly cleaned, reattach it inside the dishwasher. We hope this helps. Thank you and have a great day.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
