1988157-1-M-Whirlpool-Y708572-Cartridge-Male-Contact-Spade.jpg
1988157-1-S-Whirlpool-Y708572-Cartridge-Male-Contact-Spade.jpg 1988157-2-S-Whirlpool-Y708572-Cartridge-Male-Contact-Spade.jpg 1988157-3-S-Whirlpool-Y708572-Cartridge-Male-Contact-Spade.jpg

Cartridge Male Contact Spade

PartSelect Number PS1988157

This cartridge assembly male contact spade is made of metal. These are sold individually, though each range uses four contact spades.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Cooktop element not heating.
  • Compare At

    $4.75
  • You Save

    $.79
  • Your Price

    $3.96
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Burner Cartridge Terminal Block

Part Number 2201847

No spades or wiring come with this part. To order the spades or wiring, please research by model# of appliance.

$21.63
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.5 / 5.0, 3 reviews What's this?
1-3 of 3
 

8 of 13 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers

CustomerCalvin from Merced CA

The top would not heat,large or small eye.

Removed the bottom cover and replaced the burned contact spade. Cleaned the wires and adjust the contact holder.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 4 people found this instruction helpful

Parts Used

  • Cartridge Male Contact Spade

Level of DifficultyA Bit Difficult

Time to do repair:More than 2 hours

ToolsNutdriver, Screw drivers

CustomerDaryl from Olathe KS

Cook top module would not heat.

The contact spades were burned from 10+ years of use and the cook top module was worn. I disassembled the module, taped the top to protect the creamic cook top, sanded the metal and spray painted to restore the original white finish. On the bottom half I replaced one missing pop rivet and cleaned and spray painted the bottom to restore to the original black. When the contact spades arrived, I replaced the contact spades and reassembled the module. It now works and looks like it did when it was new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 7 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsNutdriver, Screw drivers

CustomerWilliam from York PA

I spilled a pot of soup and shorted everything out had to replace these parts

Pulled out the burners, Freed the outside rim and removed the burnerbox with the burnned out pieces removed tham and reassembled

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3