1964229-1-S-Whirlpool-W10152975-Shut Off Arm
1964229-1-S-Whirlpool-W10152975-Shut Off Arm 1964229-2-S-Whirlpool-W10152975-Shut Off Arm

Shut Off Arm

PartSelect Number PS1964229

When the icemaker shut off arm is high enough the ice maker will shut off and no more ice will be made until the level of the ice in the bin drops. Also the ice maker can be turned off by lifting the arm all the way to the top until in a locked position.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $34.85
  • You Save

    $5.81
  • Your Price

    $29.04
In Stock
Order within the next 5 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.0 / 5.0, 2 reviews What's this?
1-2 of 2
 

5 of 5 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerHeather from Blanding UT

The ice maker arm somehow came loose and fell off so the icemaker went crazy filling the freezer with ice until the water didn't have anywhere to go but all over the freezer and out onto the floor.

I stuck the end of the old arm into the icemaker device and turned it off, then cleaned up the mess and ordered a new arm. When the part came I snapped it in and it works fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 6 people found this instruction helpful

Parts Used

  • Shut Off Arm

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerROSE MARY from MARYSVILLE WA

My original armwire had fallen off in the ice bin and got bent. That is why I ordered the new armwire assy.

I REMOVED ICE BIN AND COVER THAT SITS ONTOP OF THE ICEMAKER. I INSERTED THE LONGER END OF ARMWIRE ASSY FIRST IN THE FRONT PART OF THE ICEMAKER ARM UNTIL IT CLICKED IN PLACE THEN INSERTED THE SHORTER END IN THE BACK SIDE OF ICEMAKER ARM AND PRESSED UNTIL IT WENT INTO THE HOLE ALL THE WAY THROUGH. THIS WAS VERY EASY TO INSTALL.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2