| |
13 of 17 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
CustomerGeorge from Washingtonville NY
Broken top mount mullion, broken pin and deli tray lid
Parts arrived quick and installed easy. One reveiwer said his wife did theinstall and that was my inspiration. Thank you.
|
3 of 4 people found this instruction helpful
Parts Used
-
- Vertical Mullion Rail - Black Face with White Housing
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver
CustomerClaude from Laguna Niguel CA
Broken plastic hinge pieces
one screw and electric plug and the unit slide out. Slide the new one in and your ready to go.
|
1 of 3 people found this instruction helpful
Parts Used
-
- Vertical Mullion Rail - Black Face with White Housing
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsScrew drivers, Socket set
CustomerKathy from Ellington CT
Middle section between the two french doors was broken by a four year old
We ordered the part by phone at about 4pm on Monday, and it arrived via Fed Ex at 10:30am the next day. WOW. My husband fixed it in about 5 minutes. Removed the old mullion with a socket set thing and screwdriver. Unscrewed the screw, slid the mullion up, disconnected a wider that is inside. Then he lined up the top and bottom plastic parts, reconnected the new wire, slid the new mullion in place, and screwed it on.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Vertical Mullion Rail - Black Face with White Housing
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerJackie from Weatherford TX
Section of door had broken off
Replace with. New part. Website made selecting the correct simple. Easy to order. Prompt delivery. Quite easy to replace broken part with new part. Now the door shuts automatically again and seals very tight. Successful experience!
|
0 of 1 people found this instruction helpful
Parts Used
-
- Vertical Mullion Rail - Black Face with White Housing
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver
CustomerDavid from Corpus Christi TX
Broken hindge on "french" door refigerator
Quite simple, Remove the one bold and slide the rail-mulln off the retaining clips. They all face into the refigerator so it just slides off. Disconnect the sensing wire and reverse this three step process to install. Just be careful to have all three hindges aligned before you put the bolt in.
|