BBB A-Plus
http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/52755.gif
See part 3 in the diagram

Lower Dishrack with Wheels

PartSelect Number PS1960964

NOTE: Per factory, this substituted part only has 6 wheels instead of 8 and NO longer comes with shelf rack.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Kenmore, Admiral, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not cleaning properly
In Stock

  • Compare At

    $222.35

  • You Save

    $37.06

  • Your Price

    $185.29
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos

For installing this part.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 2 3 NEXT > 16-30 of 45

 

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJohn from Grahamsville NY

Both racks were rusted

Both racks are just roll out & roll new racks back in, no tools. Racks came in just 2 days, one was damaged in transit. Called to advise PartSelect of the problem. replacement rack was here within 2 days.
Great service. Jack

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerSharon from FAllon NV

The racks were very rusted and falling apart.

Just undid the brackets holding the top rack in place and put in the new racks, locked the brackets and in the bottom put the water tower on and slid that rack in place, and bam we were ready to turn it on. It's wonderful, all new and clean. LOVE IT!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

    • Lower Dishrack with Wheels

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

Tools

CustomerDonald from Alameda CA

Outer material on rack wearing out causing rust on plates.

Took old rack out and put the new one in. The only problem was that I expected the rack to come with the central spray tower attached. It did not come with the tower at all. I had to detach the old tower and reattach it to the new rack. I didn't know how to do that. There were no instructions. However, after working with it for awhile I was able to manage it, without breaking anything. The rack and dishwasher are working fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerAnne from Portland MI

Baskets were rusting on top and bottom of dishwasher

took out the old ones and put in the new ones

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

    • Lower Dishrack with Wheels

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerKen from Hampstead MD

Lower rack assembly was deteriorating and causing rust spots on the dishes.

Wife was displeased, I bought a replacement and slid it in and presto, no more rust spots on the dishes. I will use the old rack in the garage for cleaning engine parts. Easy fix for a reliable old machine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerMaryLou from Bryan TX

Two of the he silverware basket sections were broken, and the lower tray was worn to the metal, causing some edge-stain on dishes.

The basket and the lower rack lifted right out, and the new ones inserted.
The only problem was that one wheel sent with the new rack was broken during shipping. It wasn't a big problem b/c one of the old basket wheels could be removed and snapped into place on the new dish rack.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

    • Lower Dishrack with Wheels

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

Tools

CustomerJoe from Houston TX

Lower rack rusted

Only problem was removing the spray tower from the old rack.. Had to search the internet to find out that is is very simple, just rotate tower and it pops out.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 5 people found this instruction helpful

Parts Used

    • Lower Dishrack with Wheels

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerKen from San Angelo TX

Lower rack rusted and falling apart

I pulled out the old rack, removed the spraying apparatus, attached it to the new rack and slid it into place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

    • Lower Dishrack with Wheels

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerTodd from Saint Ignace MI

Corroded lower dish rack

All parts of lower dish rack were included, except center tower. Center tower twists out of old rack and installs easily on to new rack.
Gray color is different from origional, but who cares?

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerGREG from Castle Rock CO

Replaced racks, lower rack has design flaw

Replaced upper and lower racks. The new lower rack has a design flaw: it has 3 wheels on each side, but should have 4 wheels on each side. When you pull out the bottom rack, the last set of wheels drop down into the open space where the door hinges to the cabinet, causing the dishes to bounce and shake around. Then when you push rack in, you have to lift it back up onto the tracks made for the wheels to roll on. You can't pull the bottom rack out far enough to access the back of the rack very well.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerMaria from Austin TX

Figuring out how to remove the rail stop

The lower dishrack was easy. I read some of the comments on line and figured out you had to gently rotate the tower on the lower dishrack. Removing the rail stop on the upper rack was simple once you figured out how to do it. I had to read several comments. I used a screwdriver to help push the stop in the direction of the arrow! Other comments had said a thumb push was OK. I thought directions came with the product but I contacted the help email which referred me to the "installation instructions online" which were customer comments. I spent most of the time, a good 15 minutes trying to figure out how to remove the stop rack and about a second to remove it once I knew what to do. The rest was very quick. Installing new dishracks is really very easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

    • Lower Dishrack with Wheels

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerPatti from Baltimore MD

Lower dishrack in dishwasher was rusting and falling apart.

Removed the old dishrack. Removed the plastic water sprayer assembly and attached it to the new dishrack. Removed the utensil holder. Replaced the new lower dishrack (slid right in). Replaced the utensil holder and voila! Works perfectly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

    • Lower Dishrack with Wheels

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerKyle from Harpster OH

My lower dishwasher rack needed replaced

removed the old one and replaced it with the new one very simple twist center to remove no tools needed

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

    • Lower Dishrack with Wheels

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJuan from Budd lake NJ

Replace rack assembly lower

It's realy simple you just take out the rack,
remove the parts you want to save ,like wheels or bins,and you just insert the new one and it's ready to use , no tools are needed.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Lower Dishrack with Wheels

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerCathy from Keystone IA

Wire racks rusting and breaking off

Take out the old rack and slide the new one in, that easy, and it arrived within 48hrs after ordering. Great service!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 2 3 NEXT > 16-30 of 45