BBB A-Plus
http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/52755.gif
See part 3 in the diagram

Lower Dishrack with Wheels

PartSelect Number PS1960964

NOTE: Per factory, this substituted part only has 6 wheels instead of 8 and NO longer comes with shelf rack.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Kenmore, Admiral, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not cleaning properly
In Stock

  • Compare At

    $222.35

  • You Save

    $37.06

  • Your Price

    $185.29
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos

For installing this part.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 2 3 NEXT > 31-45 of 45

 

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerSandy from Pleasanton CA

Racks were breaking apart and rusting

Bottom rack slides out and twist off center tower and twisted back on the new one and slide back in. Top rack removed rack stops with small flathead screwdriver and removed top rack accessories and put on new rack. Slide in and put rack stops back on. Easy. Note: Bottom rack is slightly different so some accessories could not be added back on. Happy with purchase

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerGerald from Grove City PA

Rust, loose parts of dish racks

Removed old top rack end caps on wheel, removedold rack. Replaced with new rack and replacedend caps.Slid old bottom rack out.Put new one in. Repair completed.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerMARY from WHISPERING PINES NC

Dishracks were rusted

unhooked the top rack and attached the new one.

lifted out the bottom rack and slid the new one in

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Lower Dishrack with Wheels

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMellissa from Baltimore MD

Rusting lower rack in dishwasher

called the local dealer to make sure of correct part # and an alternate part #, would take a week to order, called PARTS , they had the part , said it might take 5-8 days, it came the very next day and it took longer to open the box than to replace the rack( was about $30 cheaper than the dealer). thank you very much.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Lower Dishrack with Wheels

Level of DifficultyA Bit Difficult

Time to do repair:Less than 15 mins

Tools

CustomerRobert from Covina CA

Worn rack spikes

Studied old rack to determine how to remove the center tower as the new rack did not come with one.
I found a small soft tab at the bottom of the tower that released so it could be turned and lifted out and put into the new rack, reversed and locked into the new rack.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 7 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerSteve from Pasco WA

Dishwasher rack wearing out

This repair was very easy to do. Removed the old rack and removed the center spray diverter and reinstalled in the new rack. I also replaced the front panel as the old one was dented. This was very easy as well removed two srews and the panel slide off and the new one installed just as easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Lower Dishrack with Wheels

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerRussell from Milford MI

Lower rack had rust on some parts

Easy to remove the rack and the silverware tray. The only difficulty was to figure out that the center spray distributer had to be rotated off. It would be nice if the new rack was furnished with an instruction for disassembly and reassembly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Lower Dishrack with Wheels

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

Tools

CustomerMaryEllen from Woburn MA

Rack had rusted out, couldn't stack dishes

Removed the lower rack from the dishwasher. Removing the cylinder in the center of the rack was a challenge...finally figured out if I twisted it, removal was easier. Twisted back into place on the new rack...took a little while, but eventually it clicked into place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Lower Dishrack with Wheels

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerDawn from Spokane WA

Dish rack had the plastic coating peeling off in places and rusting, leaving rust on silverware

I removed old rack, took off the sprayer mount with just a twist, put it on the new rack and set it in my dishwasher

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Lower Dishrack with Wheels

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDavid from Baden PA

Rusted out lower tray

Removed old tray, rotated out spray tower. Inserted spray tower into new rack, replaced rack.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Lower Dishrack with Wheels

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerIrma from Garland TX

Lower rack rusted and needed replacement fo tower spray

Removed lower rack and after assembly of tower spray to new rack, put new rack in dishwasher.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Lower Dishrack with Wheels

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerThomas from Mendota Heights MN

Old system was rusting out.

Slid out old part, took a little bit to figure out how to remove inside spray nozzle; put in spray nozzle in new part: slid in new part.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

    • Lower Dishrack with Wheels

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerVernon from Huntsville TX

Lower dishwasher rusted very bad, I will not buy another maytag.

It was very simple,took out the middle water dispencer replaced it and filled the dishwasher . and for got about it. The lady was very helpfull and could under stand her.thanks vern

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

    • Lower Dishrack with Wheels

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerStephen from Ridgefield CT

Lower dishrack wires coroded and splitting

First I slid out the old rack, twisted the spray tower off of it and on to the new one, and slid the new rack in. No tools needed.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 9 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerStanton from Las Vegas NV

Rack corrosion

pull out rack and install new one--no tools

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 2 3 NEXT > 31-45 of 45