Quick Question!

Have you ever purchased from PartSelect.com before?

1957303-1-S-Whirlpool-W10120839A-Air Filter
1957303-1-S-Whirlpool-W10120839A-Air Filter 1957303-2-S-Whirlpool-W10120839A-Air Filter http://www.partselect.com/Schematics/Whirlpool/GU6V9FDD.gif

Air Filter

Compare At

$6.83

You Save

$1.14

Your Price

$5.69
Order within the next 6 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS1957303
Manufacturer Part Number W10120839A
Manufactured by Whirlpool

Sold individually.

This part works with the following brands: KitchenAid, Whirlpool, Kenmore.

This part works with the following products: Microwave.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Charcoal Filter

Part Number 1957304

The charcoal filter, used in microwaves, removes food odors from the air. If your filter is damaged or you notice strong odors coming from your microwave, it is best to replace it. This part is metallic and measures about 12 inches wide and 6 inches deep. The tool required for this repair is a Phillips screwdriver. First, remove screws at the top of microwave to access the filter. Next, remove the old filter and insert new filter by pushing it all the way back, so the edges connect to the two tabs. The front edge of the filter should rest at the bottom of the cavity. Do not forget to replace the grill after installing new filter. Remember to unplug your microwave from the power source before installation process.

Order within the next 6 hrs and your part ships today!
$11.36
In Stock

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 2 reviews What's this?
1-2 of 2
 

4 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Very Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Papkin from Glendale, CA

Surface lights and filters needed replacement

By pulling the filter screens units down and out with a pair of pliers I had access to the surface lights. Pulled the lights out of their sockets and replaced the bulbs. Real easy. Since the filter units were out, replaced the filters and reinstalled the filter units. The whole operation took less than 15 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Nathan from OCEANSIDE, CA

Light and fan buttons not working

The buttons are easy to access. Disconnect the power to the oven then just remove the center grill on top of the microwave then remove the screw attaching the left side grill and remove the grill this will allow access to the upper screw holding the left side panel then open the oven door and use a long slender Torx driver to remove the two screws in the side of the panel then remove the screw holding the left side lamp cover and remove the cover and then remove the left side air intake screen this will allow access to the wiring to the switches and the connector that must be disconnected to allow removal of the side panel, the connector has a small tab that must be depressed to separate the connector, be certain to disconnect the wiring before attempting to remove the side panel as the wiring is too short to allow removal of the side panel while the wiring is connected, after the wiring is disconnected the side panel can be pulled away from the oven it is simply clipped in place and will be removed by pulling it straight toward you after the panel is removed two screws hold the switch circuit board to the side panel, the buttons are part of a fragile plastic tree that is sandwiched between the side panel and the circuit board use care when installing the replacement buttons and circuit board my replacement buttons needed to be reformed by slight hand pressure to make them fit properly. To reassemble just follow the same steps in reverse order. This is a simple operation that can be done in about an hour.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2

Model Cross Reference

This part works with the following models:

PartSelect Number: PS1957303
Manufacturer Part Number: W10120839A
Brand Model Number Description
Kenmore66588532900Microwave
Kenmore66588533900Microwave
Kenmore66588539900Microwave
Kenmore66588542900Microwave
Kenmore66588543900Microwave
Kenmore66588549900Microwave
Kenmore66588552900Microwave
Kenmore66588553900Microwave
Kenmore66588559900Microwave
WhirlpoolGH6208XRB0Microwave - Hood Combo
WhirlpoolGH6208XRQ0Microwave - Hood Combo
WhirlpoolGH6208XRS0Microwave - Hood Combo
WhirlpoolGH7208XRB0Microwave - Hood Combo
WhirlpoolGH7208XRB1Microwave - Hood Combo
WhirlpoolGH7208XRB2Microwave - Hood Combo
WhirlpoolGH7208XRB3Microwave
WhirlpoolGH7208XRB4Microwave
WhirlpoolGH7208XRQ0Microwave - Hood Combo
WhirlpoolGH7208XRQ1Microwave - Hood Combo
WhirlpoolGH7208XRQ2Microwave - Hood Combo
WhirlpoolGH7208XRQ3Microwave
WhirlpoolGH7208XRQ4Microwave
WhirlpoolGH7208XRS0Microwave - Hood Combo
WhirlpoolGH7208XRS1Microwave - Hood Combo
WhirlpoolGH7208XRS2Microwave - Hood Combo
WhirlpoolGH7208XRS3Microwave - Hood Combo
WhirlpoolGH7208XRS4Microwave
WhirlpoolGH7208XRS5Microwave
WhirlpoolGH7208XRT0Microwave - Hood Combo
WhirlpoolGH7208XRT1Microwave - Hood Combo