1957166-1-S-Whirlpool-W10116811-Spray Arm Snap Retainer
1957166-1-S-Whirlpool-W10116811-Spray Arm Snap Retainer 1957166-2-S-Whirlpool-W10116811-Spray Arm Snap Retainer 1957166-3-S-Whirlpool-W10116811-Spray Arm Snap Retainer http://www.partselect.com/Schematics/Maytag/53879.gif

Spray Arm Snap Retainer

PartSelect Number PS1957166

Used with your upper spray arm.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not cleaning dishes properly.
  • Compare At

    $5.53
  • You Save

    $.92
  • Your Price

    $4.61
In Stock
Order within the next 8 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 16 reviews What's this?
 

4 of 7 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Nancy from Midlothian, IL

Dishwasher not cleaning dishes

Lower Dishrack assembly just rolled into the dishwasher-easy, easy, easy!
The Upper Spray Arm assembly- broke off tab to old arm using a screwdriver to pry off the tab. Pushed the new arm assembly and tab into place. The only problem was not to bend the prongs on the plastic tab (they bend back easily if you do happen to bend them, though)
My dishwasher cleans like new!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Jim from Corpus Christi, TX

Old spray arm was plugged up with build up.

Pull straight down to remove upper arm. Hold new arm in place and push the locking retainer into the center hole in the arm and locking it into the holder. Very simple.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: NICKIE from Weaverville, NC

Upper spray arm replacement

popped out the spray arm snap retainer that held in the upper spray arm and pushed the new snap retainer into the new upper spray arm to complete the job. I thought I must have done something wrong because it only took about a minute.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used:
  • Spray Arm Snap Retainer
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Gregory from Eureka, UT

Upper dishwasher arm fell off

I undid the four clips that attach the upper dish rack to the dishwasher. The upper arm simply unscrews from the top of the dishwasher. Unsnap clip that holds arm and remove arm. Installation is the reverse of removal.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used:
  • Spray Arm Snap Retainer
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Tim from Rogersville, MO

Top spray arm fell off

First I attempted to epoxy the arm retainer back on. It would only last about half a cycle because of heat and water pressure. I thought the appliance was probably too old to get replacement parts. Through a web search I found PartSelect. Lo and behold they had the part I needed for less than five bucks. Installation was a snap fit, dishwasher works like new now. Thank you PartSelect.

Help other customers find the most helpful instructions.

Were these instructions helpful?