Quick Question!

Have you ever purchased from PartSelect.com before?

Electronic Control Board

PartSelect Number PS1957100

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$210.42

You Save

$35.07

Your Price

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 2 reviews What's this?
1-2 of 2
 

11 of 12 people found this instruction helpful

Parts Used:
  • Electronic Control Board
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: James from Winchester, TN

Dryer start button would cause dryer to start only if it were held down. Note heater would not start.

It had been determined that the control board was bad. Simply unplug connections from board and make sure you follow the same location to plug into the new board.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

27 of 157 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Socket set
Customer: Ronald from Louisville, KY

Dryer shuts off on any cycle except "air only"

I read in the forums that thermistor replacement fixed this issue 56% of the time. I replaced the thermistor and then ran three loads of clothes through a one-hour dring cycle at the highest temperature and the dryer did not shut off.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2