BBB A-Plus
1957100-1-M-Whirlpool-W10116566-Electronic-Control-Board.jpg
1957100-1-S-Whirlpool-W10116566-Electronic-Control-Board.jpg 1957100-2-S-Whirlpool-W10116566-Electronic-Control-Board.jpg

Electronic Control Board

PartSelect Number PS1957100

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Kenmore, Admiral, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

In Stock
Recycling Rebate Available

  • Compare At

    $212.71

  • You Save

    $35.45

  • Your Price

    $177.26
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 NEXT > 1-2 of 2

 

10 of 10 people found this instruction helpful

Parts Used

    • Electronic Control Board

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerJames from Winchester TN

Dryer start button would cause dryer to start only if it were held down. Note heater would not start.

It had been determined that the control board was bad. Simply unplug connections from board and make sure you follow the same location to plug into the new board.

Help other customers find the most helpful instructions.

Were these instructions helpful?

25 of 155 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsSocket set

CustomerRonald from Louisville KY

Dryer shuts off on any cycle except "air only"

I read in the forums that thermistor replacement fixed this issue 56% of the time. I replaced the thermistor and then ran three loads of clothes through a one-hour dring cycle at the highest temperature and the dryer did not shut off.

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 NEXT > 1-2 of 2