65 of 77 people found this instruction helpful
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
CustomerRobert from Burlington NJ
Dishwasher was taking way too long to go through its normal cycle; the indicator lite did not advance to dry.
Remove just the 6 Phillips screws holding the control panel assembly to the top of the door. Panel lifted off, clearing the latch assembly. Rested it on my knees as I sat in front on a chair. Control board is right there. Wiring plugs easily pulled off the old board. Their locations are clearly marked on the board by wire colors. Removed screws holding old board, replaced with new one, plugged wires onto the new board. Screwed the control panel back on the door, being careful to clear the door latch assembly. Ran the dishwasher through a test cycle (time not included in the repair)and it works like new. Probably saved $150. in labor service charge.