| |
13 of 25 people found this instruction helpful
Parts Used
-
- Gas Dryer Conversion Kit - Natural to LP
Level of DifficultyA Bit Difficult
Time to do repair:1- 2 hours
ToolsNutdriver, Screw drivers, Wrench(Adjustable)
CustomerTimothy from Lawson MO
Brand new dryer...needed to convert to propane.
I followed the directions that came with the conversion kit; which I ordered from PartSelect. Your website was the only place that could help me. Our new dryer is actually a Samsung. The people at Best Buy were no help. I called the Samsung headquarters and a "real" person there told me I could order from them or use a Whirlpool kit because they are the same. You guys were faster in getting me one, so I went with you. My wife was happy. I would recommend you to others.
|
5 of 6 people found this instruction helpful
Parts Used
-
- Gas Dryer Conversion Kit - Natural to LP
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver, Pliers, Wrench(Adjustable)
CustomerBruce from Rogers AR
Converted gas dryer to lp
Instructions were great. Very step by step. It could not have been easier. Repair saved me a $100 service call.
|
4 of 5 people found this instruction helpful
Parts Used
-
- Gas Dryer Conversion Kit - Natural to LP
Level of DifficultyA Bit Difficult
Time to do repair:1- 2 hours
ToolsNutdriver, Pliers, Screw drivers, Socket set, Wrench set
CustomerDavid from Manhattan IL
Switch samsung dryer (w/ maytag gas valve) to lp
The directions provided to modify the gas valve were very clear. Getting to the gas valve I was on my own. Taking the top and the face off the dryer, once I figured out that there was no reaching the gas valve from any of the access ports on the back, was the only way to access to the gas valve. If you have worked on any other dryers, this modification was definitely doable.
|
3 of 5 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsNutdriver, Screw drivers, Wrench set, Wrench(Adjustable)
CustomerLori from Moreno Valley CA
Dryer was not heating consistently
Inherited an older Maytag natural gas dryer that was not heating . Just heated at start then would not after 5 mins or so. Went to Partselect site and it had a troubleshooting section and read and narrowed down the part needed by ohming the coils. Ordered the coils for less than $20 and ordered a natural gas to propane conversion kit. Parts arrived in 2 days on regular shipping, very quick! Instruction were very simple to follow and coils were installed in under 15 mins. Propane conversion kit was perfect and was installed in 30 mins and dryer ran just like new. Cleaned inside thoroughly and couldn't be happier. Thank you partselect for great service and saving what would have been more than a $300 service call. Did myself for under $50. I highly recommend this site and will use when ever I can!!! Great service, great way to do business!!!
|
2 of 4 people found this instruction helpful
Parts Used
-
- Gas Dryer Conversion Kit - Natural to LP
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsPliers, Screw drivers
CustomerScott from Fairfield CA
Conversion from natural gas to liquid propane
By following the directions included with the kit it was fairly clear. The diagrams of the control valve was helpful. It would have helped to tell which screws to remove to access the valve and where the screw was that retained the burner assembly.
|