1878632-1-S-Whirlpool-99002138-Rear Bowl Tine
1878632-1-S-Whirlpool-99002138-Rear Bowl Tine 1878632-2-S-Whirlpool-99002138-Rear Bowl Tine

Rear Bowl Tine

PartSelect Number PS1878632

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $25.69
  • You Save

    $4.28
  • Your Price

    $21.41
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Front Bowl Tine with Sleeves

Part Number 2003656

$23.48
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.9 / 5.0, 16 reviews What's this?
1-15 of 16
 

6 of 11 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRobert from Escondido CA

Rusty racks

Was discouraged seeing rust on both upper and lower racks. Remebered prior dishwasher and $300+ estimate for the racks. But the rusty parts were only some of the small moveable parts of the rack. Each one just snapped out, and the replacement snapped in. No tools at all. Five minutes and $55 later the racks looked new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDonald from Rockford MI

Front & rear bowl tines were damaged an unusable

removed old damaged tines and snapped new tines into place. Saved myself some cash, received the product in less then 5 days and did not have to drive over to the appliance store in the next town and wait two weeks for them to place the order and at a substantial savings. I'll use your service again when needed.

Donald R. Daily Sr.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers

CustomerJulie from Bedford TX

Lower dishwasher rack replacement

Purchased a replacement lower rack WPL 99002572 (which had the wheels but not sure that it still does.) Used the old fold down shelf but this might be available as a part. The rack didn't have the tines near the rear of the rack on either side--my old one had fixed/welded tines so I didn't expect this and needed replacement parts to fix it. I Ordered 4 straight clips AP4112831 (99001436)CLIP, FOLD AWAY TINE to hold the tines. There weren't any recommended tines, so found and Ordered 2 each Front place and Rear Bowl tines WPL 12002218 x 2 and WPL 99002138 x 2 that looked about the right length. Used them in pairs. On one side of the rack (right side), only the bowl configuration works--this is because the tines catch on the edge of the basket and won't fold straight up. On the other side (left), I can switch between bowl or straight tines by folding them different ways. To make this work,clip the tines to the basket so the tines set a little closer to the center of the basket than you might expect, in order to allow the tines to 'float' enough to rotate to the opposite configuration. I had to experiment with the clip location so needed a needle nose pliers to gently unlatch the clips so that I didn't break them. I also ordered a clip AP4113042 (99001746)Latch, pivoting tines--but didn't use them with these bowl tines. They might be useful with a straight tine for latching the top to the outside of the basket.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerGary from Niles MI

Rear bowl tine broke, rusted through in one spot.

Ordered BOTH the front and rear tines as the front tine showed some superficial rust through the plastic covering in a couple of spots. Re-used the tine holders which were still solid condition and flexible. Snapped bowl holder tine unit out of dishwasher, snapped new tines in place, snapped unit back in dishwasher. Took 5 minutes or less. All other parts of the dishwasher rack were still in excellent condition with no cracked spots on the vinyl covering or rusted spots visible anwhere.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJohn from Mission Viejo CA

Old parts had worn out

Replaced and repaired in less than five minutes using No tools

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerVincent from Norwood PA

The tines on the dish racks on the lower rack started to rust and some of the tines fell off.

The tines simply clipped on and off so it was easy as clipping the new ones in place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMaryAnn from Phoenixville PA

Broken basket, rusted spokes on dishwasher racks

Replaced old basket but the new one doesn't come with the handle. To remove handle from old basket I used a butter knife to slip through small notches that hold basket handle to basket.

Easily replaced front and rear tines by using clips that held the rusted ones on. Simply observed how the old clips held tines in place and copied.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Rear Bowl Tine

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJoseph from Somerset PA

Lower rack rear bowl tine rusted

removed the rusted tine (very easy) Replaced the tine with the new tine in about 3 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRichard from Mansfield OH

Rusty and broken parts

The repair to the lower wash rack could be done with my fingers. Purchasing 4 parts was cheaper than buying a whole new rack.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerKory from Stillwater MN

Front and rear tines were rusted through

Very east to repair.....pop out the rusted tines from the clips and pop in the new ones.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDonna from Tewksbury MA

The tines rusted out

The old tines just snapped out and the new ones snapped in. Very easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Rear Bowl Tine

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerGregory from Pittsburgh PA

Rusted tines on bottom rack

Very easy: simply snapped out rusted part and replaced with new part, which fit perfectly. Two minutes tops!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Rear Bowl Tine

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRICHARD from BREWSTER NY

Part was rusted through and did not stay up to hold the dishes in place

just slipped out the old tines and slipped in the new

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerCarol from Baartlett IL

Rusted tin bowl causing it to break apart

I pulled the damaged tine bowls out buy removing clips that secured the damaged tine bowls to the lower dishwasher rack. I attached the original clips to the new tine bowls and recliped the the clips to the dishwasher rack. I had to make sure I had the tine bowls facing correctly so tried this out first before attaching them to rack. It was a very painless repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Rear Bowl Tine

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJoseph from South Lyon MI

Dishwasher rack seperator rusted and broke

I thought I woulf have to purchase a whole new rack. My wife was set to purchase a new dishwasher! Not so fast I said...I got on line and in less then 5 minutes I had the exact part as shown on the schematic diagram, ordered and set to be delivered. I received it in two days and installed it in minutes. My wife got a new ring instead. We are both happy! Great service!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-15 of 16