This Charcoal Filter traps grease from your oven's exhaust to help prevent it from entering the vent, which could cause damage over time. If the exhaust fan on your microwave is not working, you may need to replace your charcoal filter. This charcoal filter is located within the intake grille of your microwave, which will need to be unscrewed and opened to gain access to the filter. The manufacturer recommends that you change your charcoal filter every six months. This filter measures 5 inches by 5.375 inches by 0.375 inches. Be sure to measure your current filter to assure correct replacement. This product is sold individually. We recommend the use of gloves during installation to protect your hands from messy grease during your repair. You should also unplug your appliance at the electrical outlet or switch it off at the breaker. Using a Phillips screwdriver, unthread the screws securing the grill. Open the door and slide the grill to the left and lift it up to remove it. This will allow access to the filter so it can be either replaced or cleaned. Remember to insert the tabs of the grill into the frame and slide it to the right when you are done. To finish, shut the oven door and secure the grill with the screws.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Kim James Y - January 25, 2024
Verified Purchase
MICROWAVE filter
I was worried that I might not find the perfect fitting filter for my microwave ...but this product was perfect! Thank You!
★★★★★
★★★★★
Judy N - February 21, 2022
Verified Purchase
Easy to replace.
This had not been replaced since we moved into the new house on 2007. Old one really wasn't
dirty. It all started when we had to order and replace the light bulb. No problem. Web site was easy to use. thanks again
★★★★★
★★★★★
Steve J - November 9, 2021
Verified Purchase
Turns out I didn't need it
After replacing the charcoal filter and cleaning the lower filter on my over oven microwave/range hood - I think I found out the range hood fan doesn't really work. I think when it was installed something was done wrong. No air flows through it. I don't think air ever flowed through the charcoal filter. I didn't really need it.
★★★★★
★★★★★
Michael F - February 2, 2021
Verified Purchase
Easy replacement
Easy to replace
★★★★★
★★★★★
Barbara B - November 27, 2020
Verified Purchase
Easy repair of filter
The part was in good condition and functions the same as the original.
★★★★★
★★★★★
Lawrence W - September 23, 2020
Verified Purchase
EASY REPAIR
The ordered part was easily ordered and delivered quickly. The price was good, GREAT SERVICE!!
★★★★★
★★★★★
Adelaide E - August 11, 2020
Verified Purchase
Easy repair. 83 year old female did the replacement.
The part arrived in great condition and in a very timely manner.
★★★★★
★★★★★
William E - June 23, 2020
Verified Purchase
easy replacement , part was as expected
part was in perfect condition and arrived quickly
★★★★★
★★★★★
Stanley F - January 28, 2020
Verified Purchase
All Good
The filter was exactly right and did the job.
★★★★★
★★★★★
Mary R - May 29, 2019
Verified Purchase
Microwave replacement filter
Ordered two to have one on hand. Filters arrived in excellent condition and much quicker then I expected. Thank you.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 19 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Charcoal Filter getting old, needed replaced
Removed the face plate above the door (2 Phillips screws.) Removed existing filter and replaced with the new one purchased. Reinstalled the face plate.
Richard L from PRESCOTT VLY, AZ
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Vent grille fell off due to cracked pieces
Simply removed old screws from the remaining pieces still attached to my microwave. Cleaned up all surfaces. Put new grille into place. Replaced screws in the holes. Went great. Part fits perfectly.
Plastic grille vent became brittle over time and broke when changing charcoal filter.
Replacing the grill is so ridiculously simple (two small screws) that it is hardly worth writing "instructions" for it.
However, ordering the right part is a problem. My microwave has a stainless steel exterior but on your parts list there is no part clearly identified as such. Only black and white. Then there's one for which a
... Read moren "image is not available" so I figured perhaps that might be it. However I received the white part in the mail.
I then enquired if the part with a stainless steel exterior was available, or just its broken plastic base so that I could transfer the stainless steel wrap from the broken piece. The white plastic part that I received does not have certain slots to attach the stainless steel wrap.
However, you merely confirmed that the part I received was white so that was not very helpful. I installed the white part and it looks absolutely horrible on top of a stainless steel oven but it is what it is. But not too happy with your service and website to be quite honest.
The grease filters you sent to me are not the same size as the filters I replaced!!! Since the new filters do not fit correctly the air does not get filtered since the filters are too small for the hole. Why would you send me replacements that are not the same size as the ones I replaced? The filters are in the hole of the original ones
... Read morebut are too short. Not happy with this transaction at all!!!
I first unplugged the microwave. I then unscrewed the 2 screws from the top grill. I had to be careful because the grill was cracked close to each screw. It was a little tricky to remove the grill. Had to tilt it down as I removed it, and make sure the microwave door was opened as wide as possible. Filters were placed as the old ones, wi
... Read moreth the metal part up I believe. A little tricky to get one of the filters to fit. Grill was replaced with care so as not to further Crack it. Kind of maneuvered grill back in place, getting right side in place first. I noticed there were several tabs on the grill that needed to be placed inside of the microwave body while reinstalling the grill. Once the grill was in place, the 2 screws were put in to hold the grill in place.
Read less
Debra from IRVINE, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Change broken 40W light bulb on Over-the-range Microwave
The original bulb came apart while unscrewing it from the back of the microwave, leaving the metal screw thread contact still in the socket. Since this is an over-the-range micriwave there isn't enough room to manuever needle nose pliers into the socket to remove the screw thread contact. So this is how we were able to remove it. U
... Read morenplug power cord. Take a standard wine bottle cork and whittle down one end until it fits in the socket. Then, using a bit of pressure push the cork into the socket snd begin unscrewing the screw thread contact until it comes out of the socket. Works like a charm!
BEWARE: KMHS120ESS takes two charcoal filters. This site doesn't tell you that! I only figured it out after ordering one, receiving it, and removing the vent cover to replace it. So then I had to order another one and pay for shipping a second time (which cost almost as much as the filter itself). C'mon PartSelect, why are these not sold
... Read morein a pair?
On top front of the microwave are two Philip's head screws holding the rail on. Remove these screws and the rail snap out the old filter (noting the dark side down) then snapping the new filter in. Replace rail. 10 to 15 minute task.
John from BILLINGS, MT
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
29 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Terry
May 7, 2019
I took the filter out to replace, but forgot if the mesh side is to be up or down.
For model number YKHMS2040BS-1
Hi Terry,
Thank you for your question. The mesh side should face up. I hope this helps. Thank you and have a great day!
19 people found this helpful.
Was this helpful?
Thank you for voting!
Rey
January 21, 2018
My microwave turns on but will not heat. I switched power setting to 90% and it warmed up some water but it i had to run it for four minutes. I took out the filters and they look good. I removed the unit from above the range. I am going to run it to see if the exhaust flue opens. I wont have time today but i will get to it tomorrow. The unit is two years old. I would like to avoid buying a new one and extended coverage is almost as much as a new unit. Any help would be appreciated. Thank you. Rey.
For model number WMH53520CS2
Hi Rey
Thank you for your question. There are a couple of parts you could check. I would suggest checking your door micro switches, your fuse, and your diode. I hope that helps. You should be able to test all three of those parts with a multi meter to see if they are working correctly. Good luck with your repair.
13 people found this helpful.
Was this helpful?
Thank you for voting!
Richard
December 27, 2017
How do i get to this filter do i have to pull the whole microwave to get to the grill to remove it?
For model number WMH1163XVS0
Hi Richard,
Thank you for your question. Before you begin any repair please unplug the appliance from the electrical outlet. Use a Phillips head screw driver to unthread the screws securing the grill. With the screws removed, open the microwave oven door then the slide the grill to the left and lift it up to remove. This will allow you to access the filter so you can either replace it or clean it. When you are done, insert the tabs of the grill into the frame and slide it to the right. Shut the oven door and then secure the grill with the screws. Restore power to the microwave. I hope this helps. Thank you and have a great day!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Frances
July 23, 2017
How many charcoal filters does it take and do you have a pic to show this, not the parts pic's but how to install. Mine only has one, but one person stated it has 2.
For model number WMH1164XWS1
Hi Frances,
That is a good question. If your microwave only has one charcoal filter then just order one. I hope this helps. Thank you and have a great day.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Jimmy
October 11, 2017
When cooking it stinks up the house. When i checked the charcoal filter it only has one but there are two blowers so the one one the right is unfiltered and there is no way to install another filter.
For model number Whirlpool wmv1160cw-2 vent
Hi Jimmy,
Thank you for your inquiry. That is correct there is only one filter listed with your microwave. To verify if you can install another filter you will need to contact Whirlpool. Their telephone number is 1-800-626-2005. I hope this helps. Thank you and have a great day!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Greg Hensley
August 26, 2019
It appears i have 2 charcoal filters in my microwave. Is this True and what are the part no's. Also how do i order these parts, direct from Whirlpool or through supplier?
For model number WMH76719CZ-2
Hello Greg, thank you for inquiring. Your model microwave has one Charcoal Filter, this part number PS1871363. It has two Grease Filters, part number PS8769987. They are sold individually. To place an order, please feel free to contact customer service by phone or you may do so online. Thank you!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Chuck
February 25, 2018
When we place something inside to reheat and push the start button it wont turn on. The message "open and close door" displays. After many attempts it would turn on but after a couple weeks it got worse, but now it only beeps and the display is filled with lights. The unit was unplugged to stop the beeping.
For model number MMV4205DH
Hello Chuck thank you for your question. I would recommend replacing the door switches for your unit. There are three of them that should be replaced at the same time. Door Switch - 3 Terminal PartSelect Number: PS10057151, Door Switch PartSelect Number: PS2361111 and Door Switch PartSelect Number: PS2361113. If even one of these switches is not functioning properly the unit is not recognizing that the door is shut to allow the unit to run. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Toni
December 17, 2019
I've never replaced the charcoal filters and my unit is 2 1/2 years old and now won't heat. What is the part number on the charcoal filters?
For model number AMV6502
Hello Toni, thank you for your question. The Charcoal filter for your unit is PartSelect Number PS1871363. This charcoal filter is located within the intake grille of your microwave, which will need to be unscrewed and opened to gain access to the filter. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
William
February 18, 2020
Grease is showing up on doors of cabinets above microwave. Does this mean that 1 or more filters some where have to be replaced or is there more to it than this? What parts do i need and how many of them? How do i install them and is there a picture showing if they are on top, bottom or sides of microwave?Thanks.
For model number WMH31017AW-2
Hello, Thank you for your question. This model has 2 separate filters. Charcoal Filter- PartSelect Number: PS1871363, and Grease Filter- PartSelect Number: PS3650910. They both are sold individually. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Teresa
October 26, 2021
When my microwave says to check the filter, which one is it referring to? The charcoal or the grease?
For model number GMH3204XVS1
Hello Teresa, Thank you for the question. In most cases it is the Grease filter, however both are normally replaced at the same time. We hope this helps!
