1854703-1-S-Whirlpool-715877-Drip Bowl - 6"
1854703-1-S-Whirlpool-715877-Drip Bowl - 6" 1854703-2-S-Whirlpool-715877-Drip Bowl - 6" http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/33960.gif

Drip Bowl - 6"

PartSelect Number PS1854703

Sold individually. This part is located beneath the element and catches any spills.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Touchpad does not respond.
  • Compare At

    $6.54
  • You Save

    $1.09
  • Your Price

    $5.45
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Drip Bowl - Chrome - 8"

Part Number 2079053

Sold individually.

$6.46
In Stock

Trim Ring - 6"

Part Number 2201799

Sold individually.

$23.04
In Stock

Drip Bowl - 8"

Part Number 2080398

Sold individually.

$10.86
In Stock

Porcelain Drip Bowl - 6"

Part Number 2091730

This black porcelain drip bowl is six inches in diameter and it has a vent hole.

$15.81
In Stock

Ring Adaptor - 8"

Part Number 2201798

This chrome trim ring is intended for use with eight inch surface burner elements.

$24.38
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 30 reviews What's this?
1-5 of 30
 

38 of 43 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

Customergeorge from burke, AL

Wanted to update surface parts to a very old (27 yrs?) jenn-air range on an island

The first task was to find the rings, drip bowls and elements on the "PartSelect" webpage. It was surprising easy, especially since I have no experience whatsoever in replacing range parts. The ordering was straight-forward, and most of the parts arrived within a week, a couple were back-ordered, but arrived a week later. Instillation was easy - just unplug elements, lift parts out, and insert new parts. I made a mistake in ordering - for the left side of the range, no adaptor rings are needed. I returned these excess parts to PartSelect, and within a week, they refunded the costs of these parts. Overall, I'm very please with the parts and service.

Help other customers find the most helpful instructions.

Were these instructions helpful?

20 of 29 people found this instruction helpful

Parts Used

Level of DifficultyDifficult

Time to do repair:15 - 30 mins

Tools

CustomerLucille from Mattoon, IL

Wanted to "renew" cook top

The drip pans, burner knobs and electric surface elements are easily removed and replaced. The new receptacles for the burners were NOT easy to replace, but electricians were on hand to install when they replaced the cook top into the new counter top. Even the electricians had to read the instructions - and remove the control panel to replace one of the receptables. Looks like a new cook top.

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 9 people found this instruction helpful

Parts Used

Level of DifficultyDifficult

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers, Wrench set

Customeranne from richwood, KY

The original equipment fan switch failed

The part we received from your supply store, a Maytag part, was in no way a direct replacement for the original Jenn-Air switch. I had to shave material carefully off all sides of the supplied switch, including the plastic flanges that were to hold the switch in place. Consequently, there was nothing left to hold the shaved-down switch in the opening. I had to rig two pieces of material to attach to the back of the switch to hold the switch, roughly, in place.
So, a poorly fitting replacement part that happens to function acceptably after an hour's work.
The repair: The balance of the repair was unremarkable. I simply removed the metal plate that the control knobs are mounted on, pulled it out of the rangetop, and removed the old switch. I snipped the wires, as your instructions said, nutting off the ground wire which is not used. I used a compression tool to attach the two wires to the quick-connect connectors you supplied (many home repair folks would not have a crimp tool for this job). The rest of the time was spent reshaping the switch you sent to fit into the too-small mounting hole.
I then simply returned the switch mounting plate, fastened with screws, to the range top.

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 9 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerMary Jo from Minford, OH

The drip bowls were old and stained; the knobs were so worn that they could hardly be read.

OK, this was easy, and it's a good thing 'cause I'm so blonde when it comes to repairs. But I will have to say this, my Jenn-Air looks like new and it is 29 years old. Thanks Partselect for making my repairs so quick and easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 14 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:30 - 60 mins

ToolsScrew drivers, Socket set

CustomerJudy from Florence, AL

I needed a new top for my jenair

i just ordered the part and replaced it with stainless steel. i am so glad the saleslady told me about it. my stove looks brand new. my drip pans look so nice with my new cover.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 30