1814710-1-S-Whirlpool-37001142-Lint Filter
1814710-1-S-Whirlpool-37001142-Lint Filter 1814710-2-S-Whirlpool-37001142-Lint Filter http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/58910.gif

Lint Filter

PartSelect Number PS1814710

Note: This part no longer comes with the felt seal. This filter collects lint as it passes through the dryer vent.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Takes too long to dry.
  • Noisy.
  • No heat or not enough heat.
  • Marks left on clothes.
  • Will not tumble.
  • Will Not Start.
  • Compare At

    $37.72
  • You Save

    $6.29
  • Your Price

    $31.43
In Stock
Order within the next 9 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Lint Duct Assembly

Part Number 2039494

This part includes the upper and lower air duct assembly and lint screen.

Order within the next 9 hrs and your part ships today!
$65.48
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 36 reviews What's this?
1-5 of 36
 

475 of 479 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver

CustomerTim from South Glens Falls, NY

The felt gasket between drum and door ripped, vent manifold from dryer to fan and lint screen broken

I pulled the bottom panel and the door panel to replace the manifold and felt gasket around the drum. I removed old gasket very easily, it peeled right off. I use brake cleaning fluid (Spray Can from Auto Zone about $1.45) to remove old glue. Used spray contact cement (Elmer's about 4.50 at Ace) and sprayed the panel and gasket surfaces and let dry. I then applied a 2nd coat and let get "tacky" and installed the gasket. You will need an extra set of hands to hold the gasket in place while you stretch it over the the panel. The vent manifold is held in place with 3 phillips screws and was installed in about 10 minutes. The only gripe I had was in the Parts-Select illustrated breakdown they don't tell you the lint screen comes with the manifold assembly, so I bought one of them too. Now have an extra lint screen

Help other customers find the most helpful instructions.

Were these instructions helpful?

368 of 370 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerMirsada from Yorktown Heights, NY

Filter lint was broken

Took it out of the box and put it in the dryer. I could not find this part anywhere else but on this website. The item was delivered the next day to my surprise.

Help other customers find the most helpful instructions.

Were these instructions helpful?

172 of 178 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerAndrew from Cadillac, MI

Broken lint filter

Picked up the box off of my back porch and carried it in the house. Opened up the box, took the filter out of the box and unwrapped it. Walked into the laundry room opened up the dryer door and gently slid the filter into the filter holder.... BAM!! It was done!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

67 of 91 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsSocket set

CustomerERIC from DUMONT, NJ

Auger assembly on maytag washer was missing two agitation fins

I ordered the necessary parts which were so easy to find with Model Number of the Washer, ordered parts on a Tuesday and recieved them on a Friday!, wow was I surprised.
I simply removed the softener dispenser, used a socket set to remove single bolt and pulled broken agitator out and installed the new one after replacing the bolt.

Help other customers find the most helpful instructions.

Were these instructions helpful?

42 of 46 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerJohn from Corona, CA

The original lint flyer was falling apart

I ordered a new lint filter from PartSelect. The part was in stock, and it was delivered to my home in approximately 40 hours -- yes, a little more than a day and a half! To do the repair, I removed the old lint filter and put the new one in its place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 36