Hard Water Filming Timer Repair Kit

PartSelect Number PS1776276

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $229.20
  • You Save

    $38.20
  • Your Price

    $191.00
In Stock
Order within the next 3 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 1 reviews What's this?
1-1 of 1
 

1 of 2 people found this instruction helpful

Parts Used

  • Hard Water Filming Timer Repair Kit

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

Tools

CustomerRandy from Eau Claire MI

Dishwasher would timer would stick on during wash cycle

I removed the 8 torx screws from the inside liner of the door. Then disconnected four spade connectors for the rinse aid and other misc. electrical. The timer is located in the top of the door behind the liner panel. There were three screws that I removed with a nut driver and then disconnected the two plug harnesses from either side of the clock assembly plus a spade connector for the ground wire. After that it was simply replacing the clock the same way it came out and reassembly of the wires and door liner. It was very simple and took only a short amount of time to complete.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-1 of 1