Part Location Diagram of WH22X37220 GE MAIN CONTROL BOARD
See part 35 in the diagram
Part Location Diagram of WH22X37220 GE MAIN CONTROL BOARD
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

MAIN CONTROL BOARD WH22X37220

★★★★★
★★★★★
6 Reviews

Rated by 3 customers 

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 227.85
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

Does this part fit my model?

Need help finding your model number?
PartSelect Number PS17626555
Manufacturer Part Number WH22X37220
Manufactured by GE
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Washer.
This part works with the following products:
General Electric, Hotpoint.
Part# WH22X37220 replaces these:
WH18X24935, WH18X25395, WH18X25896, WH18X26217, WH18X26794, WH18X27754, WH18X28174, WH18X28176, WH18X28642, WH22X28845, WH22X29349, WH22X29556, WH22X32357, WH22X35137, WH22X35239, WH22X35597, WH22X36498
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
6 Reviews
3.7
Filter By Rating:
  • 5 Stars
    4
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    2
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Walter H - October 14, 2023
  Verified Purchase
Easy to repair
The part came in great time and was easy to install. I needed a drill to take it apart, but only a screwdriver to take it apart. I did take a picture of the old board, just to make sure I put everything back in place. But I didn't even need the picture!
★★★★★
★★★★★
PATRICK D - March 17, 2021
  Verified Purchase
Great Part, Worked Great
The part is great, PartSelect is great however Fedex took a week to get the part here.
★★★★★
★★★★★
Susan M - September 6, 2020
  Verified Purchase
easy repair
part was new and just what we needed. Thank you
★★★★★
★★★★★
Jon Michael G - December 22, 2018
  Verified Purchase
Repair shop told me this part was on back order for 4 weeks. Find it on this site in stock and it was $70 cheaper. Can in in 3 days.
In stock $70 cheaper had it in 3 days.
★★★★★
★★★★★
Ross C - August 9, 2018
  Verified Purchase
Part did not work. Was faulty part. Had to return it. Cost me extra had to have repair man come ou twice.
Part did not work. Faulty part had to return it. Cos t me extra as I had to have repair man come out twice.
★★★★★
★★★★★
Anna L - April 14, 2018
  Verified Purchase
Dead on Arrival
The part was dead on arrival so i can not review the product.
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 4.2 / 5.0, 3 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer wouldn’t function using any cycle.
First thing is to download and print the programming instructions for the new control board. The instructions for downloading come with the control board. The control board fits multiple models and has to be programmed for your particular model. Unplug the washer and pull it out enough to work from the back. Remove the main control knob by pulling it off. At the top back use the nut driver and remove the 4 screws holding the metal cover. There’s a ground wire attached to the inside of the panel that doesn’t have to be removed. Let the metal cover dangle. Remove the two screws that hold the top control panel. They are located at the ends of the control panel. Slide the main control panel towards the back of the washer above 1/2” and lift it up and roll towards the front of the washer which puts the main control board in a position that allows removal. Unplug all of the connectors. Remove the 3 or 4 screws holding the plastic board stiffener, unsnap the two posts holding it to the control board and remove it. Remove the main control board. Compare the old and new board. If they match install the new board in the reverse order of removal. After reassembly and putting the washer back in place, plug it in and follow the programming instructions. My replacement of the control board went very well except the first new control board didn’t work. There was one complete zone that didn’t function. I called Parts Select and they sent me another control board which worked and the refunded the cost of the defective board but I was out some shipping expense.
Read less
  • Clay from BURNET, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer wouldn't wash rinse or spin
Not knowing for sure how to fit it I went to youtube for help watched a few videos and tested different things until I hit the right one .Moms washer is fixed.replaced lid lock,motherboard and pump I'm sure I don't need all those parts because when I found the code for the lid lock it started working
  • Cynthia from PACE, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Unit did not go into Spin/Drain cycle.
I thought it was the control board from the onset, but 'Online experts" said it was more likely the mode shifter or the lid lock. I ordered one of each, did not correct problem. Ordered the control board that was designated for this unit, it did not correct problem. Defective? Was send replacememnt, did not fix problem. Twice? Phone conversation with parts person, and after a little digging, it was NOT the correct board, correct board was not available.
Returned all parts, refunds all around. Ordered correct board from another site, installed, programed, SUCCESS! Total repair time/installation-less than 15 minutes. Getting the correct part 30 days.
Read less
  • Patrick from GAINES, MI
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Socket set
14 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
You May Also Need ?
Produce Preserver Filter
$21.56
$21.56
  In Stock
Affresh Washing Machine Cleaner - 3 pack
$12.62
$12.62
  In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.14
$19.14
  In Stock
Affresh Cleaner
$19.14
$19.14
  In Stock
Cooktop Cleaner
$17.79
$17.79
  In Stock
Affresh Ice Machine Cleaner
$20.56
$20.56
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS17626555
Manufacturer Part Number: WH22X37220
Brand
Model Number
Description
General Electric
GTW540ASP4WS
Washer - Washer
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service
MAIN CONTROL BOARD
$ 227.85
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.