4 of 8 people found this instruction helpful
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver, Screw drivers
CustomerVal from La Habra CA
The timer would not shut off the dryer.
I Unplugged the dryer from the electrical outlet. Then took off the top panel. Then removed the nut holding on the selector dial, and removed the selector dial. I then removed the two screws holding the timer to the panel. Then I removed and installed each electrical connector from the defective timer, installing it on the new timer. Then reverse procedure to assemble the dryer.
The best part of the whole experience was the quick service I received from PartSelect. Thank you very much.