This fill tube elbow is almost eleven inches long. It is all white in color and is made of plastic. It is used with the icemakers of some refrigerators.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
PAUL T - March 19, 2022
Verified Purchase
Easy install.
2 screws to remove. In and out no problems.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
No ice in ice maker
Turn water and refrigerator off, use hair to thaw the ice maker filler tube, then remove the filler tube inside the freezer. Next remove the water supply line cover plate in back of the refrigerator. Now remove the speed clip at the white pvc elbow and pull out the supply line. Next, grasp the pvc elbow with pliers and pull hard to rem
... Read moreove. The new filler tube is a 1 piece design (filler tube and elbow combined) and needs to be cut to the proper length. Mark it inside the freezer, remove it and cut to length. Now coat the outside flange with caulk or PU glue and snap into the opening. Put the speed clip on the elbow first and center it. Ensure that the spreader insert is in place in the plastic tube, then slide the supply line into the elbow untill completely engaged. Replace cover.
Removed two screws that held cover plate. remove cover plate. Remove water hose, and clamp, by compressing clamp with pliers. Remove fill tube by pulling HARD, from back.
Replace fill tube, check to be sure that it entered ice maker properly. Replace hose and clamp. Replace cover and screws.
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Patricia
January 3, 2020
The drain pan under fridge is dry, every several days there is water everywhere from fridge. The drain pan is bone dry. Ty
For model number GB2FHDXWQ01
Good Day Patricia. Thank you for your question in regards to your unit (Model Number GB2FHDXWQ01). Based on our research it is most likely blocked with ice. The first thing to do is to remove the ice maker and rear panel of the freezer to get a look. The best way to clear the ice is to just let it thaw out. You can remove the frozen food and put it in the refrigerator section. Turn the unit off and leave the freezer door open. The refrigerator section will act like an ice chest. As it thaws you should see water in the drain pan. Hope this helps. Best Regards.
2 people found this helpful.
Was this helpful?
Thank you for voting!
David
August 22, 2021
The ice maker stopped making ice a few days ago. Does this model have a water filter.
For model number WRF535SMBM00
Hello David, Thank you for the question. Checking the model number it is not showing it has a built in filter. Normally the water for this appliance would be filtered before it is sent to the appliance by an in-house water filtration system. We suggest checking the water lines to make sure they are not froze over and blocking water from passing through. If the lines are clear, you may have to replace the Ice Maker. We hope this helps!
Water dispenser makes hammering sound water then goes to slow drip will this part fix that. Thank you
For model number GX5FHTXVY05
Hello Barry, thank you for asking! The possible reasons behind this problem can be a clogged water filter, a damaged o-seal (part number: PS11747930) of the water filter, or a water inlet valve (part number: PS11738514). If you have changed the water filter recently you will need to drain all the water out to make sure there is no trapped air, also look for kinks in the water supply line. We hope this helps, please feel free to reach out to customer service for further assistance. Thank you.
Our icemaker recently started leaking into the ice cube bin. This only happens during the tray filling process. Please let us know what would be problem causing this problem and what part we need to replace.
Thank You,
For model number WRF535SMBMOO
Hello Jim, thank you for reaching out. According to our research, we would recommend checking the fill cup to ensure that it is aligned and placed correctly. If the issue still occurs, you may need to check the water inlet valve, part number PS11755667. We hope this solves your problem!
