Quick Question!

Have you ever purchased from PartSelect.com before?

1681519-1-S-Whirlpool-D7824601-Icemaker Wire Harness
1681519-1-S-Whirlpool-D7824601-Icemaker Wire Harness 1681519-2-S-Whirlpool-D7824601-Icemaker Wire Harness 1681519-3-S-Whirlpool-D7824601-Icemaker Wire Harness http://www.partselect.com/Schematics/Maytag/21389.gif

Icemaker Wire Harness

PartSelect Number PS1681519

It is recommended to replace this harness when replacing the icemaker.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Ice maker not making ice.

Compare At

$54.01

You Save

$9.00

Your Price

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.6 / 5.0, 3 reviews What's this?
1-3 of 3
 

11 of 15 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: Patrick from El Paso, TX

Icemaker quit working

The icemaker unit comes right off, only 3 screws hold it in place, so it was a breeze replacing it. I probably saved a couple hundred bucks by doing it myself, thanks to the great service at partselect.com.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

10 of 13 people found this instruction helpful

Parts Used:
  • Icemaker Wire Harness
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver
Customer: FRED from TURNERSVILLE, NJ

Ice maker was not running

I removed the screws and pulled the unit out a few inches. The wiring harness was difficult to disconnect since I did not know how it was being held in place. Once I did get it disconnected I saw there was a tab that had to be depressed. There was an access hole for depressing the tab but I did not see it until I had the unit removed. The instructions only say disconnect the harness, but not how. So I learned the hard way, damaging the harness.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

9 of 13 people found this instruction helpful

Parts Used:
  • Icemaker Wire Harness
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Patricia from Sebastopol, CA

My ice maker stopped working and just leaked water endlessly

First I ordered the ice maker, but not the wiring harness...didn't fix the problem so I ordered a wiring harness, but ordered the wrong one...so I emailed parts select and got a prompt response on how to return the mistake and which part I actually needed. It was a "special order" but got in within days. Wonderful service!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3