| |
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsScrew drivers
Customerpeter from ottawa KS
Dishwasher stoped spinning dishes were dirty
unsrewed the plastic hub in the middle of the lower spray arm, removed the spray arm, took the screws out of the filter cover, removed and replaced the filter, put the cover and screws back and the lower spray arm and then the hub. the only thing I have a queston about is the proper location for the two plastic seals.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:30 - 60 mins
ToolsScrew drivers
CustomerMarsha from Pasadena CA
Upper arm fell off, dishes were not getting clean, dishwasher leaked
My husband offered a new dishwasher, (portable $500-$600), but I thought that was unecessary. So he handed me the job. I figured out the parts, easy since the arm fell off, and the notes on your website recommended doing also the lower arm and filter. (Great notes and recommendations by the way)
I ordered the parts at noon one day and they arrived at 11.00 a.m. the next day!! Incredible!!
My son looked at the instructions and had it done in less than an hour, for LESS than $50!
It works better than ever and does not leak any more(can't figure out why!)
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsNutdriver, Screw drivers
CustomerMICHAEL from MT. MORRIS NY
Not cleaning
PULLED BOTH DISH RACKS OUT THEN THE SPRAY ARMS. FROM THERE TOOK EVERYTHING ELSE OUT DOWN TO THE TOP OF THE MOTOR. REPLACED BOTH SPRAY ARMS AND ANYTHING THAT A FILTER OR A SCREEN IN IT. GOT EVERTHING BACK TOGETHER AND RAN THE UNIT FULL OF DISHES WITH NO ISSUES AT ALL.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:1- 2 hours
ToolsScrew drivers, Socket set
CustomerBrenda from Lancaster NY
Dish washer was not cleaning properly
there was buildup in the arms - we could see white chunks blocking the holes. we cleaned them out. using the diagram printed from you site we compared the other parts to the picture as we took them off. we determinted a few were bent or distorted or worn and ordered replacements. items arrived very quickly -in 2 days. (which does feel long enough when you are hand washing dishes). we put things back together in correct order using your diagram again and it's been clean dishes ever since. we also changed dish soaps figuring the build up was from that!! thanks for your help and your speedy delivery!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerLois from Olathe KS
Dishes didnt clean
my husband took the bottom rack out, unscrewed it where there were screws, lifted up the unscrewed part, took the filter out,cleaned out any gunk, replaced the filter put the part back on, rescrewed it, put the rack back in and it works much better.
|