1655662-1-S-Whirlpool-7711P172-60-Twist-Style Clock Knob
1655662-1-S-Whirlpool-7711P172-60-Twist-Style Clock Knob 1655662-2-S-Whirlpool-7711P172-60-Twist-Style Clock Knob 1655662-3-S-Whirlpool-7711P172-60-Twist-Style Clock Knob

Twist-Style Clock Knob

PartSelect Number PS1655662

Sold individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.1 / 5.0, 3 reviews What's this?
1-3 of 3
 

2 of 2 people found this instruction helpful

Parts Used

  • Twist-Style Clock Knob

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerOSCAR from BRISTOL CT

Replace clock-adjust knob

Although normally a push fit, we drilled and tapped a #6-32 cross hole and used a set-screw to attach the small knob.

The original knob is still hiding somewhere but, thanks to PartSelect we are back in business !

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

  • Twist-Style Clock Knob

Level of DifficultyVery Difficult

Time to do repair:More than 2 hours

ToolsScrew drivers

CustomerRachael from Adams MA

Timer know would no longer set the time...

I removed the screws holding the bezel, removed the control panel frame, unhooked the four wires from the timer, and removed the timer. I cut the glue holding the circuit board into the frame and removed the circuit board. I unsoldered the faulty encoder switch, dissassembled the switch, determined the correct specifications for the switch, and ordered the nearest equivalent from an electronics supplier. I modified the new encoder to accept the shaft from the old encoder and I re-drilled the circuit board to fit the new encoder. I then soldered and wired the encoder, reversing the wires to correct the direction of rotation. I then reinstalled everything and added the knob purchased from partselect.com. Now it works. Tough repair - not for the faint of heart or those of average skill. But for the record, installing the knob was of course child's play and took only a moment.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Screw drivers

CustomerThomas from Manhattan Beach CA

20yr old ice maker would not work

Had to use the filler part from old unit as the short hose coming from back of fridge went into the back of it rather than the side as on the new unit. Met taking units apart to remove parts, but not that difficult.. Parts were shipped right on time, and exactly as shown.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3