SVC-HINGE EPICURE DOOR GOLD;82508,DO130 DE81-04348A

Hi Thomas, thank you for the question. We have found the instructions to replace the door hinge. These instructions may not be of the same model but will help you in removal. You may need to follow these steps: 1. Open the door and you will see the clips on either side. 2. It locks on to the both sides. 3. You can push that and when you pull it up about right there, grab the side. 4. Place the volume of the door on a protective surface. 5. Place the sole of your foot on the long arm of the hinge and make sure you have a protective sheet. 6. Push the top of the door towards the floor. 7. Press down by foot and remove it by slowly lifting up the foot, controlling the spring. 8. Put your foot on top of the other side and pull down the long part. 9. Un-thread all the screws, lift the piece of metal away from the other metal to expose the springs you track. 10. Push down a little right, taking some of these off. 11. You have another piece that is holding the piece to the part, so you have to bust that lace. 12. Take out all the screws with the glass to separate. 13. Move it out of the way and flip it over and you can see the hinges. 14. Tilt it up and it comes right out. 15. Follow the same procedure backward to complete the installation. We hope this information helps!

Hello Bruno, thank you for the question. You will need two door hinges for your model. We hope that helps!