Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Sylvia S - July 17, 2022
Verified Purchase
not the part I wanted......
I looked up the part number and went to your online site and ordered it; it was not the part I wanted (but will keep it in case I need it) what I wanted was the container that holds the icecubes.
★★★★★
★★★★★
Mark K - March 17, 2021
Verified Purchase
Received the part within a few days of ordering
The part fit and worked perfectly.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Oscar
April 10, 2023
Blinking light not making ice
For model number GFE26JMMAFES
Hi Oscar, thank you for contacting us. According to our research, a blinking power light on the ice maker is an indication that ice cubes may be stuck in the ice maker. Turn off the ice maker for 15 seconds and turn it back on. Push in on the paddle 3 times and only 3 times within 15 seconds of powering the icemaker back on. The icemaker should enter the harvest state within 3 minutes. The heater will turn on for a minimum of 20 seconds and the rake inside the icemaker will make one full revolution and return to the "Home" position. In the "Home" position, the rake teeth are even with the ice stripper teeth. At the end of 3 minutes, the icemaker mold should fill with water. The water valve energizes for 4 to 7 seconds. The green light under the On/Off switch should be on and solid. If the issue remains after running this troubleshooting, check the inlet valve, part number PS11767934, for any clogging or defect. We hope this helps!
Ice maker is freezing the fill tube between every 3-5 days. It used to be every six months or after loading freezer with fresh food. Is there a fill tube heater in the ice maker?
For model number GFE26JSMAFSS
Hello Ken, thank you for your inquiry. Based on our research, the issue is most probably with the ice maker compartment temperature sensor, part number PS304103. We would recommend replacing it to solve the problem. We hope this helps!
