Cogged V-Style Belt - 46.5"

PartSelect Number PS1611481

This fan drive cog style belt is forty-six and a half inches long and half an inch wide. It is used for many of Amana's brands of gas and electric clothes dryers.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.0 / 5.0, 1 reviews What's this?
1-1 of 1

5 of 7 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:More than 2 hours


CustomerLew from Saint Simons Island GA

Drum belt broke and one front drum roller bad

First I removed the screws along the bottom of the front panel and let it down from the top studs. The next step was to remove the top. Doing this required the removal of the small screws at the top left and right side of the frame. Once you lift up the top like a hood on a car, you then can unplug the wiring connector that attaches to the control panel. With the top and front panel removed the drum belt can be placed around the drum. I replaced the wiring connector and the top using the two screws, and the the front panel just fit into the top roung plug openings. All that was left to do was then replace the few screws along the bottom of the front panel. As for the motor to dryer blower, it's a matter of removing the back panel and it's straight forward from there the motor belt is right in front of you at the bottom of the dryer.
The Best thing about dealing with Partselect is they sent the belt and drum roller out to me within two days. What service! I won't forget them when I need parts for my applicances. My gas dryer is over 30 years old, and I had no idea I could still get parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-1 of 1