| |
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJane from Monument Beach MA
Old lint filter was torn
Ordered replacement lint filter. Took out the old one, and put in the new one. Voila! Very easy!!!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerMeagan from Ridgeland MS
Torn lint filter
My lint filter was torn up, and ordering a new one was really easy... I ordered, got it in very quickly, replaced it and continued on!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerAngelo from Staten Island NY
Old filter screen frame was cracked
Simply removed old one and replaced with new one
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerTheodore from Grove City OH
Lint trap had a tear - needed a replacement
Went online to find the lint trap for an older Maytag dryer - found one at Sear's Parts for $ 30.70 - then found the exact same part at PartsSelect for $ 9.00. Ordered from PartsSelect, received the replacement in just a couple of days and it works perfectly.
Very happy with over all service.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:1- 2 hours
ToolsNutdriver, Screw drivers
CustomerRobert from Rochester MN
Constant rumbling sound as dryer is operating
I changed the drum rollers, belt, and belt pulley. The noise continued. I then replaced the blower fan. The problem was then fixed.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:More than 2 hours
ToolsNutdriver, Pliers, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)
CustomerLillian from Nichols NY
The drum was hard to turn by hand and the dryer ran with a lot of noise.
The key points to a complex repair:
Unplug the power cord and don't touch the plug conductors.. it's 220 VOLTS!!! Also I use safety glasses, just a thought.
Take the small cover off the back and make a drawing right on the back of the dryer or inside the cover of how the drive belt runs off the drum to the motor and around the idler pulley. When you put it back on don't put it around the back of the metal bracket. It goes between the bracket and the puley. When you get the front off and the drum out clean the lint out of the motor. The rollers go together dry no oil or grease. Don't leave the drive belt on the floor when you put the dryer back together. A wedge on the floor under the front panel will help lift it in place.
Good luck. And don't put your hands in the dryer when it's running.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerDewayne from Waynesville NC
Lint was blowing outside through the vent hose
no-brainer, just took the other filter out and replaced it with the new one. perfect fit, and now there is no more lint blowing outside. the part arrived in only 3 or 4 days and was exactly like original, thanks to your web-site
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJoel from Bradenton FL
Lint filter had a small hole
I pulled the old lint filter out and put the new one in
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customerjohn from pahrump NV
Just a filter
i love your look up site. it is great. it is so easy to fine a part, pictures and all part numbers.
great job.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customerlouis from wetumpka AL
Old filter was broken
jst droped the new filter in
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerRoger from North Haven CT
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerAnnette from Harrisburg PA
Lint filter broke
Our lint catcher broke at the top and was not allowing the front loading door to close. It could not have been the best use of efficiency either! I went online and found your site and ordered the part I needed. Most impressive, was that I received this small part within 2 days! Not sure why I waited so long to order the part - I could have saved myself a lot of aggrevation long ago. Thank you for your quick service!!!
|