1602167-1-S-Whirlpool-33002970-Lint Filter
1602167-1-S-Whirlpool-33002970-Lint Filter 1602167-2-S-Whirlpool-33002970-Lint Filter 1602167-3-S-Whirlpool-33002970-Lint Filter http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/MA85E5.gif

Lint Filter

PartSelect Number PS1602167

This filter collects lint as it passes through the dryer vent.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Takes too long to dry.
  • Compare At

    $11.82
  • You Save

    $1.97
  • Your Price

    $9.85
In Stock
Order within the next 6 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 27 reviews What's this?
1-5 of 27
 

36 of 40 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsSocket set

CustomerDaniel from Millmont, PA

Dryer wouldn't heat

This was the first time I ever attempted such a repair on an appliance, but it was fairly easy once I figured out how to take the front of the dryer off! I was almost certain that the igniter was the problem was it didn't glow like it did before. On this particular LP Gas dryer from Maytag there is a little service door on the front near the floor. It is almost impossible to get your arm in there plus still have room to shine light in! I took off the two screws at an angle down near the floor and the whole front came off. I used a mini socket wrench to disconnect the igniter. I didn't have to remove the screw as the part slips on over the screw, then you just tighten the screw, connect the cable and it worked perfectly! Thanks PartSelect! As for the lint filter...the original has been broken for probably close to 10 years. It was just a matter of slipping the new one in.

Help other customers find the most helpful instructions.

Were these instructions helpful?

17 of 17 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerRichard from Valley Center, CA

Broken lint filter screen frame

This is hardly a "repair". You toss out the old lint screen and put the new one in. The hardest part was getting the lint screen out of the plastic bag it came in...

ta da it is done...

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 8 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerDeborah from North Attleboro, MA

Dryer lint filter had rips and holes

Researched for part on PartSelect, ordered part, arrived next day, cut open delivery package and plastic bag containing lint filter and placed new filter in dryer filter channel. Quick & super easy - my kind of DIY!

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 7 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:More than 2 hours

ToolsScrew drivers, Wrench (Adjustable), Wrench set

CustomerMichael from Westlake, OH

Drum dragging and squeaking loudly.

Disconnected the dryer, removed the front cover, front drum support, and the entire drum (30 min.). Completely cleaned all lint and debris from inside the dryer (30 min.). Installed the new tumbler roller shafts and drum support rollers (20 min.). Installed the new drive belt (30 min.). Re-assembled and re-connected the dryer and ran to verify operation (30 min.). The dryer runs like new.
I found I didn't need the front glide kit , as I replaced the glides a couple years ago and they were in excellent condition.
All in all, the parts, service and instructions were outstanding. I will use PartSelect whenever I need to repair my appliances from now on.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 5 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

Customerwilliam from salt lake city, UT

Lint filter was old and had hole in it

ordered new filter,,,,

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 27