1574776-1-S-Whirlpool-12550122Q-Freezer Door Gasket
1574776-1-S-Whirlpool-12550122Q-Freezer Door Gasket 1574776-2-S-Whirlpool-12550122Q-Freezer Door Gasket

Freezer Door Gasket

PartSelect Number PS1574776

This white door gasket is used to make an air-tight seal for the cabinet when the door is closed.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Freezer section too warm.
  • Compare At

    $102.30
  • You Save

    $17.05
  • Your Price

    $85.25
In Stock
Order within the next 3 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Fresh Food Door Gasket

Part Number 1574774

This white door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

Order within the next 3 hrs and your part ships today!
$94.41
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.0 / 5.0, 3 reviews What's this?
1-3 of 3
 

15 of 21 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsNutdriver

CustomerAlice from Mattapoisett MA

Gasgets old, split, and hard

When the gaskets arrived, in only two days, we unpacked them and layed them out overnight to allow them to come to room temp. The next day I emptyed the frig while my son took out the 20 or so screws around the door. We then layed the door panel on the living room floor pulled off the old gasket replaced the new, lined up the panel and replaced the screws. We did have to put blue painters tape on the doors until the gaskets seated. We suggest this might be included with the directions. This was a very easy DIY project. I belive it will ad years of service to the frig. After all it's cheeper to maintain and repair than to replace.

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 10 people found this instruction helpful

Parts Used

  • Freezer Door Gasket

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerTracey from Dania Beach FL

The door gasket was worn out

I removed about 25 nuts from the door which held the inside panel in place. Then I removed the old gasket and placed the new one, making sure it was fitting correctly. I replaced the 25 nuts and the door was ready to go. I had to tape the door shut for a couple days so the new gasket could wear in. It took about 15 min.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

  • Freezer Door Gasket

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsPliers

Customermichael from Chicago IL

Old gasket caput

only problem was many screws -- like 30 or so -- took a while to get off without a socket wrench and then get back on -- all while the freezer was dripping. Had to do it over a period of time.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3