1572703-1-S-Whirlpool-12200055-Escutcheon Kit
1572703-1-S-Whirlpool-12200055-Escutcheon Kit 1572703-2-S-Whirlpool-12200055-Escutcheon Kit

Escutcheon Kit

PartSelect Number PS1572703

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 2 reviews What's this?
1-2 of 2
 

10 of 11 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerDonald from Bloomington MN

Fan switch stiff and shorted burner control, scratched up escut plate

1st-turned off power to stove top, then removed 2 screws to loosen the control panel. 2nd- I removed the shorted infinite switch by using a pliers to loosen the nut holding the burner in place, undid the electrical connections (noting where each was attached to the old control) and reattached them to the new control. Then I undid the nut holding each of the other 3 burner controls, detached the wires to the old fan switch, reattached the wires to the new fan switch, i removed the red idiot lights (by moving them sideways) from the escut kit. I then reattached everything to the new plate, secured the panel to the stove top, turned the juice on, And it worked as it should, and the new plate made the stove top appear almost new. 30 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 6 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsPliers

CustomerPeggy from Abilene TX

Burners wouldn't heat

We bought our home in 1993 with the Jenn-Air range top. It was old then, but all 4 burners worked. Over the years, I bought a grill cartridge from an appliance stove. (It would have been much cheaper thru you guys!) I loved the stove. Several years ago one of the burners stopped working and the stove really looked old and not clean! After pricing replacement rangetops, I wanted to order from the appliance stove again, but found your website. Easy to find the right replacement parts. I just removed the old cartridge and placed the new one end. That took less than 1 minute. My husband replaced the knobs and the kit with the logo. I'm guessing maybe 30min to 1 hr. He turned the breaker off to the stove, then remove the knobs and cover. He cleaned the wires and stuff!! At Christmas, all our grown children thought I had bought a new stove!! My stove is better than ever!! I will definitely buy from you guys again!!! So easy!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2