Quick Question!

Have you ever purchased from PartSelect.com before?

1572686-2-S-Whirlpool-12200028-Electonic Clock - Black
1572686-2-S-Whirlpool-12200028-Electonic Clock - Black 1572686-1-S-Whirlpool-12200028-Electonic Clock - Black 1572686-3-S-Whirlpool-12200028-Electonic Clock - Black http://www.partselect.com/Schematics/Maytag/33096.gif

Electonic Clock - Black

PartSelect Number PS1572686

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$372.35

You Save

$62.06

Your Price

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.9 / 5.0, 2 reviews What's this?
1-2 of 2
 

8 of 11 people found this instruction helpful

Parts Used:
  • Electonic Clock - Black
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: David from Plainfield, IN

Clock and timer unit not working after lighting storm

Removed 4 screws under the top unit that holds the stove control knobs. Open oven door for better view. Tilt whole unit (width of stove) up and out of top flange. Remove knobs for timer and the two control knobs (that operate the range burners) nearest the clock. Take out the screws by these knobs, 2 per knob and then you can get the frame that holds clock unit out. Make a drawing of wires to replace on timer unit or as I un plugged one I hooked it up to the new unit. Make sure you have turned off range at your fuse box before working on stove. Works good as new now, I assume it was hit by lighting that also made me replace our garage door opener.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 4 people found this instruction helpful

Parts Used:
  • Electonic Clock - Black
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Gayle from Lenoir City, TN

Electronic clock assembly quit

It was easy to get apart. I drew out a schematic of where the wires were so I could put them back in the same place. I plugged them all back up and it worked! Only problem was, there was a dead mouse behind the panel! He had not chewed anything, so the unit just went out from age.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2