Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ben Piper
November 15, 2019
Part diagram shows burner parts as 54 & 54a I want to replace all 4 burners. Should I purchase 2 of each or four 54a all 4 burners work but 2 only stay on high. But I think it would be better to replace all. Best regards ben
For model number FEC30C4AC1
Hi Ben, you would need 2 of each. Thank you for your question and good luck with your repair!
I have a cooktop model ffec3005lw1 burner #1 bottom right section #1 54a is not holding at proper temps... at times it will glow bright red when set at 5 and does not go back to 5 it looks like i need a burner infinite switch... but it shows that it is located in section#1 at 54 not 54a can you help.... witch switch needs to replaced...
For model number FFEC3005LW
Hi Frank, the first burner, looking at the diagram from left to right is fig 54 part PS1529263. Thank you for your question and good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Steve
February 28, 2023
I have 2 burners not working properly (both large ones)
One does not hold temp properly, on Medium setting, goes to high and gets too hot. (Infinite switch -?) The other one was on High, and appeared to shut off. Started working again when I turned it off and back on. (burner switch -?
Also part # PS1529263 - is that for item 54 or 54a on the diagram?
Thanks!!
For model number FFEC3605LB
Hello Steve, thank you for the question. Both large burners are controlled by their surface burner switches. The surface burner switch turns the element on and off and controls how much heat the element produces. You may need to replace your surface burner switch, part number PS2342883, on both burners. Part number PS1529263 is 54 in the diagram, it is the burner infinite switch. We hope this information is useful!
I appreciate the response to my previous question.
I understood that the infinite switch regulates the amount of heat to the burner element. How does the burner surface temp switch work? How does it know the infinite switch setting? - how do they work together? Also is part# PS1529263 for both item 54 & 54a?
Thanks!!
For model number FFEC3605LB
Hello Steve, thank you for your inquiry. You have four burners in your model and four switches. Each switch controls the heat to each burner. The right rear burner and left front burner are controlled by their individual switch, part number PS1529263, at location 54. The right front and left rear burners are controlled by their individual switch, part number PS2342883, at location 54A. Also, part number PS1529263 is for the item at 54. We hope this information helps!
