1528268-1-S-Frigidaire-316455410         -Electronic Oven Clock/Timer
1528268-1-S-Frigidaire-316455410         -Electronic Oven Clock/Timer 1528268-2-S-Frigidaire-316455410         -Electronic Oven Clock/Timer

Electronic Oven Clock/Timer

PartSelect Number PS1528268

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Will Not Start.
  • Touchpad does not respond.
  • Will not program.
  • Compare At

    $138.68
  • You Save

    $23.11
  • Your Price

    $115.57
In Stock
Order within the next 12 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.8 / 5.0, 4 reviews What's this?
1-4 of 4
 

54 of 58 people found this instruction helpful

Parts Used

  • Electronic Oven Clock/Timer

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerAlberto from Houston TX

We had a transformer go out in our block and made a surge which blew out the electronic oven control

The repair of the oven was really easy . I removed a total of 7 screws with a 1/4 inch nut driver to remove the back cover of the instrument panel. I then unplugged the wires from the from the oven control and with a phillups screw driver I removed 4 screws that hold the oven control,the face plate with the words on it has to be taken off the old control and put on the new one . I then installed the new oven control by putting the 4 screws back on and plugging back the wires. I then replaced the back cover with the 7 screws and plugged the power back in the outlet, The clock has to be adjusted and your done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

21 of 24 people found this instruction helpful

Parts Used

  • Electronic Oven Clock/Timer

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Screw drivers

CustomerCarol from Newberry Springs CA

The clock unit went out so the oven could not work.

The screws had to be removed to take top off stove back and remove the unit. New unit was put in place and screws put back in.

Help other customers find the most helpful instructions.

Were these instructions helpful?

15 of 17 people found this instruction helpful

Parts Used

  • Electronic Oven Clock/Timer

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver

CustomerRonald from Altoona FL

Oven would work sporadicly, while baking

Removed back plate from range. Removed the clock/timer from range. (note), a special square headed screwdriver needed to remove this unit. I had to use the old clock/timer face. This required careful removal of the face from old unit. Plugged in new unit and refastened it . Turned on range and checked all functions, everything worked fine. Probably save at least one hundred dollars by doing it myself. Will probably use Parts Select for any otaher work I do in the future. Ron

Help other customers find the most helpful instructions.

Were these instructions helpful?

14 of 19 people found this instruction helpful

Parts Used

  • Electronic Oven Clock/Timer

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerNels from Montgomery TX

Clock/timer panel failed

My brother swaped the panels out in 15 minutes after pulling range out from the wall to get at the attachment screws/speed nuts. Only minor problem was re-gluing the trim cover on to the new part.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4