1528267-3-S-Frigidaire-316455400         -Electronic Clock Timer
1528267-3-S-Frigidaire-316455400         -Electronic Clock Timer 1528267-1-S-Frigidaire-316455400         -Electronic Clock Timer 1528267-2-S-Frigidaire-316455400         -Electronic Clock Timer

Electronic Clock Timer

PartSelect Number PS1528267

This is the electronic clock timer mechanism only. The overlay or touch pad is NOT included. To get the overlay, please use the model# of your appliance to search.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Little to no heat when baking.
  • Will Not Start.
  • Touchpad does not respond.
  • Little to no heat when broiling.
  • Will not program.
  • Oven not heating evenly.
  • Element will not heat.
  • Compare At

    $138.41
  • You Save

    $23.07
  • Your Price

    $115.34
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Clock Overlay

Part Number 439796

$21.55
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.2 / 5.0, 23 reviews What's this?
16-23 of 23
 

2 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerTHEODORE from WAXAHACHIE TX

The lr surface burner and the oven were inoperable.

After receiving the parts in only two days, I first turned off the circuit breaker. Then I pulled the stove out from the wall. I used the nutdriver to remove the upper rear panel. Using the screw driver I removed the defective clock timer and used a pocket knife to carefully remove the clock timer face. I positioned the clock timer face on the new clock timer and installed same in the stove panel. (I had made a list of the wires and their colors to insure the proper placement on the new clock timer). Installed the four screws and on to the burner switch. Two front panel screws removed and the defective burner switch was out. Installed the new burner switch, connected the wires, installed the two screws, pushed on the knob and I was ready to go. Re-installed the reap panel, pushed stove back in, turned on the circuit breaker and tested the burner and oven. All worked correctly. A very easy repair!

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

  • Electronic Clock Timer

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerAaron from Royal Center IN

Oven would not turn off, and temperature was inconsistent

Removed 8 screws from back, took out timer and replaced. Simple. $112 fix versus replacing with a $600 oven. Good for another 5 years!

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 18 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)

CustomerThomas from St. Petersburg FL

Unit lost digital display, wouldn't control oven

First I weighted out weather it was better to repair the unit or relpace it with a used one. The stove was in good condition so a small investment of $140.00 was a no brainer, repair went off smothly once I found your web site and could see the parts I needed for the repair, also realy enjoyed the timely manor in which I received the parts, Thanks. Tom

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Electronic Clock Timer

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers, Wrench set

CustomerLinda from Fort Washington MD

Clock/timer

The Clock/Timer had no juice coming thru for the stove to come on for cooking.So once I receive my parts to fix it, I had no problem getting the job done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Electronic Clock Timer

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJeremy from Baton Rouge LA

Oven neither broil was coming on

I google parts for my oven and I found you all. I read a couple of your other stories and I see I wasn't the only one that ran into this problem before so I took there advice and the part was a my home in three day I pit it in and it is working now thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Electronic Clock Timer

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerCory from Chunchula AL

Lightning took out my clock timer.

Used a nut driver to take off upper silver back off. Took one wire off at a time and rewired new timer. Used same nut driver to remove old timer,stuck on old cover on new timer and screwed it it. Rescrewed back on, plugged it in and it works great.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Electronic Clock Timer

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerBRYAN from Bassett VA

My stove quit woking from the push button panel

First I unplug the stove and then started to take off the back panel off behind the stove. Then I took the relay panel off by taking the four screws, that holds the relay in place. Now it took me a few minutes to unplug the wires
from the relay panel. Let me tell you that these wires were
really hard to pull off the relay. After a few minutes later
then I started to put the new relay panel back on. The wires were easy to put back on the new relay. Then I put the back panel back on and then plug the stove back in. After that the power was back on and the new panel fixed my issue.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Electronic Clock Timer

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerMichael from Agusta GA

No problems

real easy with no problems, thank you

Help other customers find the most helpful instructions.

Were these instructions helpful?

16-23 of 23