This drive blade is a little under five inches long. It is used for the icemaker of many refrigerators.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Refrigerator DRIVE BLADE
Troubleshooting
This part fixes the following symptoms:
Ice maker won’t dispense ice | Ice maker not making ice
This part works with the following products:
Refrigerator.
This part works with the following products:
Frigidaire, Kenmore, Electrolux, Crosley.
Part# 241684503 replaces these:
AP6893193, 241684501, 5304404345, 7241684501
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
5.0
Filter By Rating:
5 Stars
3
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Charles N - May 11, 2023
Verified Purchase
Worked as expected.
Easy replacement that restored the ice feed from fridge. The small square hole in the old blade had worn into an oval allowing the blade to slide back on the corkscrew drive. The new blade has the original square shape hole and no longer slides back and stays next to the circular housing. My only negative is the cost of ground shipping and handling (~$10) seems steep for a piece of metal that weighs a few ounces.
★★★★★
★★★★★
Alfred L - June 6, 2019
Verified Purchase
Worked as expected.
Frigidaire LECR23EFEO - PS1526405: Part Number: 241684501. The part came on time and was in good condition.
The rod that cranks the dispensing of the ice had worn out the rectangular cut-out of the attached blade and the blade needed to be replaced.
To do this the complete mechanism of the ice bucket and the dispenser had to be completely taken apart. Everything came apart and needed to be assembled in proper order. Not an easy task. Printed out a schematic to help me to put it all together again.
★★★★★
★★★★★
Lou B - March 28, 2018
Verified Purchase
Easy repair
The ice maker is working again
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 8 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ice maker would not dischare ice
Followed the online video from this site
DAVE from CRESTON, IA
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice was not allowed to be dispensed because of worn part on auger.
Followed instructions in video that was suggested when I placed the order.
Craig from AIKEN, SC
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Icemaker not pushing out ice
Consult the exploded view of the Ice Container on this site. A likely cause the end plate (17) is worn. This plate connects the rotating corkscrew to the final plastic worm that pushes the ice into the crusher and thence to your waiting glass. The worm alone will not do the trick. To replace this plate, you need to take out all o
... Read moref the screws you can see, including the one that holds the spring for the crusher select bar.. First, the front cover, then the plate, and finally, locking ring from the worm and the black housing for the crusher. Now you can remove the whole worm assembly. Using a cloth or rubber insulator to protect it, unscrew the end screw and slide off the crusher teeth. Store on the table as a unit to facilitate re-assembly. Slide off the old bar and worm, put them back, and re-assemble. Takes a little dexterity to get the crusher select bar back, but not hard. Easy job.
Took the ice storage bin out. Took the unit apart,and disamble the augar unit. Ordered parts from manufacture, which arrived in two days. As soon as I got the parts, I reassambled it. Work perfect. Good job!
Downloaded a schematic of the ice container. Disassembled the ice container, keeping track of which different type of screws went where. Followed the schematic to ensure proper sequence of blades and spacers. Manually rotated unit prior to installing into the freezer in case of binding. Finished.
Installation was completed by following the online Parts diagram. Had to completely remove all parts, including the blades in ice crusher, and re-assemble. Glad the online diagram was clear and easy to read.
ice maker would not rotate out cube or crushed ice.
1. Remove outer plastic face cover (4) screws.
2. Revove (1) U type nut keeper & (1) metal washer.
3. Remove (1) plastic nut on end of metal auger.
4. Remove inner plastic cover (4) screws and disconnect control rod. (Note postion of control rod befor disconnecting)
5. Note position an
... Read mored order of metal blades and plastic spacers on auger before siding off the end of auger to reposition them upon re-assembly.
6. Remove metal support panel from end of ice bucket (4) screws.
7. Remove auger & plastic cylinder from ice bucket.
8. Remove - slide drive blade off auger.
9. Drive blade replaced.
10. Re-assembled other items removed in reverse order
Read less
David from Ponca City, OK
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
40 of 58 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice not depensing, Door rubbing
Remove Ice dispenser from freezer, removed all screws that hold auger & blades, by remove ring & washer. Removed blades replaced broken drive blade and re-assembled. Removed ref. door install new bearing at bottom re-installed door. Both job very easy.
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Doug
April 8, 2022
The ice maker dispenser will not dispense ice correctly. In looking at the dispenser bin I see nothing broken but there is a blade on the auger that you can tell is supposed to be attached to the round wheel that rotates and pushes the ice out of the dispenser in the door into your glass. This blade is not attached to the wheel any longer but is free to slide back and forth on the auger. Is there a clip or something that attaches to the auger behind this clip to keep it in place on the wheel so the ice will come out?
For model number FGHC2331PF7
Hi Doug,
Thank you for your question. We have included a link to one of our YouTube videos that you may reference on how to install the driver blade. The refrigerator in the video may appear different from yours, but it will give you a general idea on how to install the part. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
George
March 11, 2023
My augar rotates but does not produce ice cubes. The metal blade is detached and seems like the wheel doesn't turn. Does the metal blade seems to be the problem?
For model number fs26lfdsb
It may be that ice clump has formed inside. Remove the ice bin, thaw and empty contents. Clean the ice bin (wipe/dry) and replace. The metal blade is necessary. You will need to replace it. Or, if the parts that it attaches to has been damaged, the Drum PS1526412 or Auger PS1526550 they will need to be replaced. There is also an option for a Complete Assembly PS1991430. We have videos for all three parts so that you may view the repairs. We are pleased to have been able to help.
ice cubes dispense, but it will not crush ice any more
For model number LFSS2312TPD
Hi Gerald, thank you for the question. If your dispenser only dispenses cubed ice and not crushed ice, then the ice dispenser solenoid, part number PS8691994, is most likely faulty and may need to be replaced. We hope this information helps!
