Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS1526382
Once a glass is pressed against the actuator pad it will cause the dispenser to deliver ice or water when activated.
This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.
This part fixes the following symptoms:
Removed, the drip panRemoved the screws holding the ice/water dispenser in place.Pulled up on the ice/water dispenser to remove it from the door.Removed the screws for the broken actuator (noting the location of the spring) and removed the actuator.Reinstalled the new actuator making sure the spring is in the proper location.Replaced all screws in reverse order.
Help other customers find the most helpful instructions.
Were these instructions helpful?
The actuator was easy . . . just remove 6 screws (3 outside and 3 inside) and pull out assembly. The actuator popped out and I replaced it.The water filter replacement was easy once I figured out how to use the quick connect fittings from the tube to the water filter assembly (see Youtube).
The hardest part was figuring out how the front plate comes off. The tray will come forward when pried with a screwdriver. Then the top will come off but you will have to leave on due to attached wires. After that it was a piece of cake. Unscrew screws (6), remove small plates holding arm in place, remove arm, replace with new actuator, and close things up. As far as the valve, just take your time and, if needed, cut off pointed ends of tubings and push into new valve. Unplug color coded plugs and plug into new valve. Reattach valve to fridge and your done. We started everything up before attaching backing to make sure there were no leaks.
I ordered the part that i needed to fix the broken one online through part select .com. The part arrived very quickly and i repaired the lever the same day. I was very impressed with your company and I will recommend you to anyone I know who needs appliance parts.
took off bottom plate to water/ice dispensor, removed three screws, took off front plate, removed three screws, unpluged water connector, removed two screws holding down water actuator where it pevits from and then replaced with new to find out the new part was off white vs white, does not look to good.....
simple. removed the three screws on the front of the freezer door as shown on the parts list online, removed and replaced the part by removing two additional screws.The bin was just slipped in.
I (45 year old female) repaired this very easily. Pulled off the tray that catches water/ice overflow, unscrewed 3 screws, removed the ice/water panel from the freezer door, then removed 6 more screws, peeked to see how the original was installed slipped the new part into place and replaced all the screws, panel, etc. and done in less than a 1/2 hour (including cleaning parts not usually exposed for cleaning). Works like a charm!
first I drilled out two rusty screws. removed panel from door, disconnected water hose, installed actuator-water. fought to get water hose back in.replaced drilled out screws.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.