| |
4 of 6 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerJulia from Saco ME
Piece of cake!
Remove the drip tray to expose the 3 screws...remove screws and then 3 more screws to remove broken actuator and replace with new part.....very easy repair!
|
2 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerStephen from Crawfordsville IN
Broken shelf supports
First removed 3 bottom screws on ice dispencer, unpluged the wires then pulled unit out of door. Then removed 2 flat pivot brackets, changed the actuators, then reversed the assembly. On the support studs, were pryed out of side walls and the new one's inserted, used a very small hammer to drive the pin's on the studs.
|