Quick Question!

Have you ever purchased from PartSelect.com before?

1524989-1-S-Frigidaire-154577401         -Water Inlet Tubing
1524989-1-S-Frigidaire-154577401         -Water Inlet Tubing 1524989-2-S-Frigidaire-154577401         -Water Inlet Tubing http://www.partselect.com/Schematics/Frigidaire/FR1LXKHX.gif

Water Inlet Tubing

PartSelect Number PS1524989

This part has been redesigned by the manufacturer and no longer has flexible ends. It is now a straight, flexible rubber hose. Clamps are NOT included.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Leaking.

Compare At

$31.72

You Save

$5.29

Your Price

$26.43
Order within the next 12 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 3 reviews What's this?
1-3 of 3
 

13 of 16 people found this instruction helpful

Parts Used:
  • Water Inlet Tubing
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Sandra R. from Groveland, FL

Old hose was split

The Parts finder was the big help. After that all that was needed was to loosen the clamps and replace the old hose with the new one A piece of cake. Slide the washer back into place and replace the screws that hold it to the counter. Out and back in, 30min. top end to complet the job

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 6 people found this instruction helpful

Parts Used:
  • Water Inlet Tubing
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Thomas from Wheaton, IL

Water fill hose leaked.

It is rather easy to repair. After you remove the screws that secure the top of the dishwasher to the countertop you can slide the disherwasher out far enough to gain access to the hose. The hose pulls off after you slide the spring clips down the hose far enough so they no longer grab. Then simply reverse the order and you're done. Less than 30 minutes and you should no longer have to hand wash your dishes!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 4 people found this instruction helpful

Parts Used:
  • Water Inlet Tubing
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: Jimmie from Houston, TX

Dishwasher not cleaning dishes, found it not filling with water because hose was ruptured

Turned off elecrtic and water to dishwasher and pulled dishwasher out from under cabinet. Removed broken hose using pliers to open hose clamps.
installed new hose.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3