1524982-2-M-Frigidaire-154576501-Bottom-Gasket.jpg
1524982-2-S-Frigidaire-154576501-Bottom-Gasket.jpg 1524982-1-S-Frigidaire-154576501-Bottom-Gasket.jpg 1524982-3-S-Frigidaire-154576501-Bottom-Gasket.jpg

Bottom Gasket

PartSelect Number PS1524982

This gasket goes on the bottom of the dishwasher door. Note: Once the gasket is replaced and you continue to have water around the bottom corners of the door panel, you may need to order the splash shield kit.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Leaking water.
  • Compare At

    $15.58
  • You Save

    $2.60
  • Your Price

    $12.98
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Tub Gasket

Part Number 8260227

The gasket provides a waterproof seal between the tub and the door.

$10.40
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.2 / 5.0, 33 reviews What's this?
31-33 of 33
 

0 of 2 people found this instruction helpful

Parts Used

  • Bottom Gasket

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJoe from Garrison TX

Dishwasher leaking

replace the door gasket

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

Tools

CustomerRonald from Soperton GA

Leak at bottom of door

Removed door gasket then replaced bottom gasket

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 4 people found this instruction helpful

Parts Used

  • Bottom Gasket

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerMark from Raleigh NC

Dishwasher leaked by bottom of door

Removed door covering. Removed door (it was nice to have a helper for this as the hinges spring closed as the screws are removed). Flipped door over, leaving the wires attached. Removed the bottom seal, and put new one in. This looked like it would slide out by a side, but it actually pulls straight down. It is notched, so there isn't a way to put new one in the wrong way. Attached door (again helper a bonus). Attached door cover.

Help other customers find the most helpful instructions.

Were these instructions helpful?

31-33 of 33