1524982-2-S-Frigidaire-154576501         -Bottom Gasket
1524982-2-S-Frigidaire-154576501         -Bottom Gasket 1524982-1-S-Frigidaire-154576501         -Bottom Gasket 1524982-3-S-Frigidaire-154576501         -Bottom Gasket http://www.partselect.com/Schematics/Frigidaire/Frigidaire_Thumb/1Y86I1UE.gif

Bottom Gasket

PartSelect Number PS1524982

This gasket goes on the bottom of the dishwasher door. Note: Once the gasket is replaced and you continue to have water around the bottom corners of the door panel, you may need to order the splash shield kit.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Leaking.
  • Compare At

    $16.14
  • You Save

    $2.69
  • Your Price

    $13.45
In Stock
Order within the next 12 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Tub Gasket - Gray

Part Number 8260227

The gasket provides a waterproof seal between the tub and the door.

Order within the next 12 hrs and your part ships today!
$10.68
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.2 / 5.0, 33 reviews What's this?
1-5 of 33
 

144 of 156 people found this instruction helpful

Parts Used

  • Bottom Gasket

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerScott from Flowood, MS

Bottom door seal fell apart and started leaking.

First I opened the door all the way. Second I reached down to the bottom gasket then grabed it on the right end of the seal that is on the right side of the door. Then I pulled the end outward from the bottom of the door toward the heater coil in the bottom of the washer. It came out real easy. You see it just snaps into a little plastic groove under the door. I then cleaned up the area for food and soap particules. I then placed the new gasket in place by lining up the notch toward the right end with the piece of plastic that encloses the right end of the plastic notch on the bottom right end of the door. Then push it in untill it stops going into the notch. It snaps in but does not make a snaping sound. It just won't go in no more.

Help other customers find the most helpful instructions.

Were these instructions helpful?

40 of 45 people found this instruction helpful

Parts Used

  • Bottom Gasket

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerNejla from Chicago, IL

Dishwasher was leaking

The strip comes right out when you pull, there is a space to grip it on the left and pull it out. The notch goes on the right side when you put it back in; it only goes in one way. I didn't get it all the way in the first time and closed the door; the gasket came right out. A clear sign that I had done something wrong! So I put it in again, this time pushing it as far as it would go. It went all the way in and stayed. It doesn't click or anything, but you can kind of feel when the notches all connect. Also, it doesn't slide right out again.... very easy!

Help other customers find the most helpful instructions.

Were these instructions helpful?

31 of 32 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

Customerbeth from green bay, WI

Leaking from the bottom of the door

With the door wide open and lower dishtray out, I pulled the old gasket out of its channel. I cleaned the channel with a rag and replaced it with the new gasket. It needed to be trimmed about an inch in order to get the door to close properly. Took me about 5 minutes. Then I removed the old bottom door gasket. Just grasped the plastic edge showing while the door is completely open. Pull outward with fingers moving toward the heating element. Cleaned this area also. Took the new gasket with notch on the right hand side of the dishwasher and pushed it into place. If you get down and look closely, you can see where the notch hooks up. The rest of the piece just slides in after that. Hasn't leaked since! No leaks AND no service call fee. Parts came super fast! So glad I found this website. I'm a housewife, you can do this!

Help other customers find the most helpful instructions.

Were these instructions helpful?

26 of 29 people found this instruction helpful

Parts Used

  • Bottom Gasket

Level of DifficultyA Bit Difficult

Time to do repair:More than 2 hours

ToolsPliers, Screw drivers

Customermatthew from west river, MD

Dishwasher leaking

Thought the problem was a faulty door gasket (there was a gap in the middle of it) so I ordered new(new one had a gap also) replaced it anyway - maybe it was worn out? Still leaked! Had to sit and stare at it and cycle it through. finally realized the spray arm had a hole in the end that was spraying directly into the gap in the door gasket. Hot glued the hole and it stopped so I bought a new spray arm - no leaky!

Help other customers find the most helpful instructions.

Were these instructions helpful?

13 of 16 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerRichard from Spring Hill, FL

Found water leaking at bottom of door

1. Bottom door gasket removed very easy by grabbing left corning and pulling out. Starting with notch on right side, slide the hard plastic side up at a slight angle to catch the slot the gasket will seat in. Slowly moving toward the left, push gasket into seated position. Notch in gasket will make sure it is in correct position. Push gasket all the way in so that it is flush with bottom edge of door. Watch when first sliding gasket in, it has to g at a slight up angle or it will fall into an empty space.
2. Remove Tub gasket by gripping one side and pulling out. Replace in same fashion making sure the angled wedge of gasket is first part that lays flat in slot. Working from one side to the other, make sure the gasket seats completely. Trim excess if necessary.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 33