Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS1524956
Water is supplied to this part via the pump assembly.
This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.
This part fixes the following symptoms:
I have had to keep replacing the spray arm on the bottom of my dishwasher which takes like 2 seconds to do.. First you open the dishwasher and than pull the bottom basked forward and reach down and pull the spray arm up and pop the bottom of the spray arm off and put it on the new spray arm and slip it back into the dishwasher over the thing that makes it spin around.. but the tricky part is and I didn't know this and this is why my dishwasher spray arm kept falling over and melting on the heating element.. you have to turn it till it clicks in.. and your done..
Help other customers find the most helpful instructions.
Were these instructions helpful?
It required no tools. It took less than one minute to connect the spray arm to the bottom of the unit. Our dishwasher is working perfectly now.
This was right before T'Giving. Ordered the part Wed, and it arrived on Sat morning. I had read the other comments, so thanks to the person who said to make sure you snap the new one in place and check for a snug fit, the replacement was in and working in no time at all.
I installed the new spray arm without any tools and it worked perfectly.
I removed the old spray arm by pulling it off of the base then I pushed the new one on and made sure it was on properly then I pit the base back into the dishwasher and it was good as new!
Took no tools. Removed the melted pieces and snapped the new ones in the machine and I was ready to start washing!!! My wife and I are very impressed with prompt and courteous professionalism of PartSelect . I will recommend them highly. I would rate this a 5 star rating, wasn't able to change that star from one to 5
Removed old spray arm, fitted new spray arm. VEry easy. Sorry I didn't do it months ago
It was super simple. I popped the clips that were holding the old spray arm on and then popped the new one in place.
Found the base was not snapped in. Fixed that by simply pushing down on it and turning until it snapped in place. Ordered a new spray arm when it came in just snapped in literally took less than a minute. Fixed for less than $30 Can't imagine what a repairman would have charged.
1-2-3 snapped off the old and snapped on the new! New part was just as ordered and just like original! My dishwasher is like new again! Thanks PartSelect for your great price and prompt shipment!
Just repaced it in less than a minute.
My friend who is the custodian at my school where I teach, came over and looked at the dishwasher. He found that the spray arm had a pinhole in it and looked to be melted. We went online after finding the model number and I ordered the part. It came in a couple of days and he showed me how to snap off the old arm and replace it with the new arm. I did not need any tools, all you have to do is squeeze the two clips at the bottom of the spray arm so that it snaps onto the round support. I did it and now have a non leaky dishwasher and clean dishes Yay!
Received the part and snapped it in place without any tools. It works great!!!
Order the part here, it arrived in days, pushed it on it's base. all done!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.