1524955-1-S-Frigidaire-154568001         -Lower Spray Arm with Shield
1524955-1-S-Frigidaire-154568001         -Lower Spray Arm with Shield 1524955-2-S-Frigidaire-154568001         -Lower Spray Arm with Shield 1524955-3-S-Frigidaire-154568001         -Lower Spray Arm with Shield http://www.partselect.com/Schematics/Frigidaire/Frigidaire_Thumb/V60CKUUA.gif

Lower Spray Arm with Shield

PartSelect Number PS1524955

This spray arm is located on the lower half of your dishwasher. Water is forced through this spray arm by the unit's pump and motor assembly. The force of the water propels the spray arms, spraying water and detergent onto the dishes on the dishrack.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Not cleaning dishes properly.
  • Leaking.
  • Noisy.
  • Not draining.
  • Compare At

    $29.46
  • You Save

    $4.91
  • Your Price

    $24.55
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 26 reviews What's this?
 

5 of 6 people found this instruction helpful

Parts Used

  • Lower Spray Arm with Shield

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

Customerdavid from mountlake terrace, WA

Our spray arm came off and when it landed it landed on the heater which melted the ar,

i just took off the old and poped on the new, it was way to easy! no tools required!

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 9 people found this instruction helpful

Parts Used

  • Lower Spray Arm with Shield

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerMelissah from Nottingham, NH

I melted my other spray arm when I was cleaning the dishwasher strainer!

Although the part I ordered was not an exact match, it was a Frigidaire piece and fit onto the spray arm assembley the same way. And if I do say so, it actually seems to clean the dishes better! All I did was clip the new one into place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

  • Lower Spray Arm with Shield

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

Customerjames from PENTWATER, MI

Lower sprayer arm melted after being lodged

Pulled the old one off and pressed the new one on (plastic clips hold it on). Dishes much cleaner now.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

  • Lower Spray Arm with Shield

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerLoren from Sacramento, CA

Water leaking from bottom of door

Replacing the part was easy. Just pop the old one out and pop the new one in. This item fixed my leaking door problem. The old arm had fallen against the heating element, which burned a hole through the end. Water was shooting out that hole and leaking under the bottom door seal. Replacing the door seal did not help, but replacing the arm fixed the leak.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers

CustomerEric from DeForest, WI

Dishwasher wouldn't drain after washing

The drain motor on the dishwasher started to and eventually did fail. I removed the two screws holding the unit in and the front plate on the bottom. I slowly walked it out from under the counter, and tipped it up on its left side. I removed the two mounting screws, and loosened the hose clamps on the inlet and outlet of the pump. Flushed out the drain line of left over soap and goo the pump failed to clear. Then installed the new one reversing the process.

Help other customers find the most helpful instructions.

Were these instructions helpful?