Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS1517734
This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
Replaced timer knob and timer plas.shaft. Very simple. Pair of needlenose pliers and screwdriver. Removed back plate on dryer control panel unpluged wires from old timer. Replaced wire to new timer replaced back panel job complete.
Help other customers find the most helpful instructions.
Were these instructions helpful?
UNPLUG APPLIANCE PREVIOUS DAY.removed metal panel(six screws) behind knobs.compare new switch to old. transfer wires to new switch one at a time. gently turn switch counter clockwise while lifting just enough on plastic that prevents switch from turning. install new switch opposite manner.I added one very small wood screw in whole provided to stabilize switch. must be short and skinny1/8x #2 so as not to break or protrude plastic.Maybe GE left out of mine and others have screw?Knobs just pull off and push on except the timer on washer has a clip between knob and bezel (see video on website.)
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.