http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/44861.gif
See part 20 in the diagram

DISCONTINUED

PartSelect Number PS1492650

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 1.5 / 5.0, 1 reviews What's this?
1-1 of 1
 

3 of 3 people found this instruction helpful

Parts Used

  • DISCONTINUED

Level of DifficultyDifficult

Time to do repair:More than 2 hours

ToolsScrew drivers

CustomerJack from Houston TX

Uneven heating/ high heat broiler to no heat

After replacing heating element then selector switch, I came to think the only other thing was the thermostat. It finally worked...but not without some tribulations. This note is for a repair involving thermostat for a w130 Jenn-air or Maytag wall oven, DO NOT FOLLOW INSTRUCTIONS INCLUDED WITH REPLACEMENT PART! It says the BR and BA terminals are to be reversed with this replacement part...not so! After re-connecting (as per instructions) NOTHING WORKED! If you have this model Jennair or Maytag, my suggestion is to replace the wires to connections just as they were removed from the old one. I finally did this after much frustration and electrical testing with a multimeter. Hope this note helps someone. Good Luck!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-1 of 1