1491652-1-M-Whirlpool-W10119828-Lid-Hinge-Mounting-Screw.jpg
1491652-1-S-Whirlpool-W10119828-Lid-Hinge-Mounting-Screw.jpg 1491652-2-S-Whirlpool-W10119828-Lid-Hinge-Mounting-Screw.jpg

Lid Hinge Mounting Screw

PartSelect Number PS1491652

Sold individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $2.44
  • You Save

    $.41
  • Your Price

    $2.03
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.3 / 5.0, 3 reviews What's this?
1-3 of 3
 

105 of 116 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Socket set

CustomerMichael from Claremont CA

Top part of agitator (auger) was not turning

Using kit 285587 was straight forward. Removed fabric softener dispenser & sealing cap. It took more time to find the socket set (needed a 7/16 socket) with a long driver (10 inch) than to unscrew & remove the auger & agitator.
Cleaned up the bowl whilst it was apart (good buildup of junk under the agitator). Replaced agitator, new thrust washer to find that grease should be applied but isn't included in kit (get part not 350849). Grrr.... Applied new auger, cam, dogs and holder. (No instructions in kit for assembling cam, dogs & holder, but you can work it out ok). Applied new bolt & washer, new seal on cap. Installed fabric softener. Could have been a 15 minute job but peace and quiet in the garage makes it worthy of taking longer ;-)

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 5 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Socket set

CustomerJames from Cincinnati OH

The washing machine started smoking and stopped agitating.

I followed the you tube video provided when I ordered the parts. It was all I needed to make the repair. It was simple. It saved me the cost of a new washing machine. I would highly recommend it. In fact I am ready to order more parts to fix a Kitchen aid mixer.

Help other customers find the most helpful instructions.

Were these instructions helpful?

18 of 184 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsScrew drivers, Socket set

CustomerLucia from Temecula CA

Washer wouldn't spin, lid switch broken

Removed the back panel and cabinet. Removed the pump and separated the gear box and motor. Replaced coupler, reassembled. Lid switch removed/replaced very easy, as was lid screw.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3