| |
86 of 95 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsPliers, Socket set
CustomerMichael from Claremont CA
Top part of agitator (auger) was not turning
Using kit 285587 was straight forward. Removed fabric softener dispenser & sealing cap. It took more time to find the socket set (needed a 7/16 socket) with a long driver (10 inch) than to unscrew & remove the auger & agitator.
Cleaned up the bowl whilst it was apart (good buildup of junk under the agitator). Replaced agitator, new thrust washer to find that grease should be applied but isn't included in kit (get part not 350849). Grrr.... Applied new auger, cam, dogs and holder. (No instructions in kit for assembling cam, dogs & holder, but you can work it out ok). Applied new bolt & washer, new seal on cap. Installed fabric softener. Could have been a 15 minute job but peace and quiet in the garage makes it worthy of taking longer ;-)
|
2 of 5 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers, Socket set
CustomerJames from Cincinnati OH
The washing machine started smoking and stopped agitating.
I followed the you tube video provided when I ordered the parts. It was all I needed to make the repair. It was simple. It saved me the cost of a new washing machine. I would highly recommend it. In fact I am ready to order more parts to fix a Kitchen aid mixer.
|
18 of 184 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:1- 2 hours
ToolsScrew drivers, Socket set
CustomerLucia from Temecula CA
Washer wouldn't spin, lid switch broken
Removed the back panel and cabinet. Removed the pump and separated the gear box and motor. Replaced coupler, reassembled. Lid switch removed/replaced very easy, as was lid screw.
|