| |
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsSocket set
CustomerLea from Brookeville MD
The top portion of the agitator stopped working
First I watched the online video to be sure of the parts I would need and for any tips that might make the repair easier.(The video suggested replacing the bolt, and it looked to me to be a good idea to replace the seal). I removed the softener dispenser (which exposed the inner cap). Then I removed the inner cap (which exposed the agitator bolt). I removed the bolt and lifted out the agitator. Popped the top portion off, replaced the directional cogs and then put it all back together. I am a fairly handy person but appliances are not my thing. The video gave me all the assurance I needed. Fifteen minutes and $15; sure beats calling a repairman!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver
CustomerTom from Sun City Center FL
Agitator spine freely
Fantastic. With your exploded views and video it was super simple. Will definitely use you again.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:30 - 60 mins
ToolsScrew drivers, Socket set
Customersheila from belding MI
Wouldn't agitate
removed agitator from washer - too easy - but need hubby to pull top from bottom of agitator as i wasn't strong enough.
took top off per online instruction, put back together. works like a champ
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
Customerkwesi from springfield MA
The machine could not spin or pump the water out
I watched the tutorial video on the web which was more than anything i can imagine of.Very detail, helpfull and it makes my fixing very easy.After replacing those two items the machine begins to work without problem.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers, Socket set
CustomerVincent from Dewey AZ
Agitator cams broke
Follow the easy instruction video and save the $100 that it would cost you to have a service person come out and do it.
Thanks Part Select
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:More than 2 hours
ToolsNutdriver, Pliers, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)
CustomerFRANK from MESA AZ
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers, Socket set
CustomerWilliam from Avon Park FL
Pauls had disintgrated
removed the agitator, cleaned old parts and installed new parts.
The parts I ordered came the day after they were shipped.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsPliers, Socket set
CustomerDonald from Bethel Park PA
The top of the agitator stopped.
Easy repiar. I used the online video from this web site and it took no time at all. Washer works normal and saved some money.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsSocket set
CustomerBeth from Thousand Oaks CA
Agitator was not turning during every wash
I am a woman and not very experienced with large appliance repairs. This was very simple thanks to the diagram posted and the other comments. It saved us time, repair costs and a new washer for now. The ultimate recycling :). Thank you to all who posted
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJESSE from BIG SPRING TX
Dispenser was shaking, ratlling
Dispenser is a snap on. type Very easy to complete.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsSocket set
CustomerRandy from Mills WY
This unit was not agitating
I removed the center bolt that holds it in place.Removed the old agitating unit and installed the new parts. Very simple.I was more then happy with the ordering and repairing.I will deffinetly use this system again
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsSocket set
CustomerCharlie E from Canandaigua NY
Agitator didn't work
I over ordered parts because this website doesn't list everything in the agitator repair kit... so I over spent about $10... so be careful of misleading parts list when ordering a "kit"... all the parts should be there. All I had to do was pop the top off, pull the cap out, unbolt the agitator and remove it... then put together the new dogs and rotator... ofcourse the kit cap with a new bearing (which wasn't listed on the included parts, so I have a spare for 15 years down the road) Then I lined up the holes, installed a new gasket on the bolt, and bolted it back together.... I also learned that I didn't even need the kit, I only needed new dogs! (that's the part that locks into the teeth on the agitator and caused it to spin and push the cloths down)... could have saved probably $20, but I fixed my washer myself and even though it cost me nearly $40 in parts and I'm sure I saved atleast $100 doing it myself... this site is very easy to navigate and find the parts... I will always come back to this site for parts!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsScrew drivers, Socket set
CustomerSusan from Springfield IL
Top part of agitator not working
Removed agitator cap. Barrier was stuck, so I cut it in 2 by hammering a big knife in, then removing pieces. Removed screw and ifted out agitator in one piece. Separated top and bottom by standing on bottom and pulling up on top. Put bottom back in washer. Replaced thrust washer and other parts in agitator repair kit. and reassembled everything. (Used Gunk plumbers silicone grease instead of "dual action agitator grease".) Barrier cap came with O ring seal, so did agitator kit, so I didn't need the O ring I ordered. Ended up with 2 extras.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers, Socket set
Customerroger from cape coral FL
Top half of agitator not working
popped off the the cap on top of agitator and then lossened nut with socket and exstenion and took off top half of agitator the replaced plastic gogs
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsSocket set
CustomerRobert from Harrisburg IL
Upper agitator was'nt turning--clothes werent getting clean
Thanks to the exploded parts diagram online, I was easily able to determine the sequence of how the parts went together. The whole thing was very simple, turned out, all I really needed was the "dogs", and the seal, but it was a breese. I have never really been a gearhead, but I do work construction, this was soo easy, even my brother in law could have done this. I have to believe that a service call to fix this would have been $100-$200 dollars, this cost me less than $30
|