1 of 2 people found this instruction helpful
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
CustomerScott from Washington GA
The display went out
First I removed the air deflector at the top of the microwave with two screws. Then I removed the single screw that held the control panel. After I removed the control panel I removed all the wires plugged into it, marking the ones with similar plugs so I put them back correctly. The next step was removing the 4 screws that held in the circuit boards and display. Then I reversed the entire process. It was a breeze and saved me hundreds of dollars over a professional repair.