http://www.partselect.com/Schematics/GE/GE_Thumb/00120907i01.gif
See part 58 in the diagram

USE GEH WR49X10227

PartSelect Number PS1483297

This part works with the following brands: GE, Hotpoint & Kenmore.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.9 / 5.0, 1 reviews What's this?
1-1 of 1
 

8 of 11 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerDALE from JACKSONVILLE FL

Door dispencer wtr/ice ran continuously.

First I removed the front cover (pried a screwdriver gently under the bottom plastic seal between housing shield and front cover, it came off nice and easy without damage).
Removed electrical plugs from electronic board (front cover) so that it did not hang from the wires and get it the way. Then removed four screws holding housing shield on. Removed housing shield, first observing with new parts next to me how it came apart. and then disassembled funnel from shield. Simple but being careful is the key to putting the new unit together as with any plastic parts it's easy to snap if forced.
Replaced all parts in reverse order removed.
This is a good time to clean all parts for any mold build up that could not be reached otherwise.
Parts select personnel were courteous and very helpful. Especially when I almost ordered the wrong color parts. Ask questions if not sure.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-1 of 1