1482519-2-S-GE-WH43X10034        -Dual Action Agitator
1482519-2-S-GE-WH43X10034        -Dual Action Agitator 1482519-1-S-GE-WH43X10034        -Dual Action Agitator 1482519-3-S-GE-WH43X10034        -Dual Action Agitator

Dual Action Agitator

PartSelect Number PS1482519

This does not come with the fabric dispenser - must order separately or use original part.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Will not agitate.
  • Shakes and moves.
  • Unusual Noise.
  • Pumps but will not spin.
  • Compare At

    $44.68
  • You Save

    $7.45
  • Your Price

    $37.23
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Fabric Softener Dispenser

Part Number 272900

$12.16
In Stock

Agitator Coupling Kit

Part Number 1517844

Washing machine agitator drive bell with bolt. It connects the transmission drive shaft to the agitator base. *NOTE: Hold down bolt not sold separately.

$5.93
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 15 reviews What's this?
1-15 of 15
 

489 of 494 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsSocket set

CustomerPaul from Carneys Point NJ

One of eight clips broke off of the agitator assy allowing the assembly to come lose on heavy loads.

I replaced the coupling by only having to remove one bolt with a socket wrench. Once replaced I installed the new assy over the coupling making sure ro align the splines then pushing down until the assy snapped into place. Easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

45 of 56 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsWrench(Adjustable)

CustomerAmy from Falling Waters WV WV

The metal shaft of the agitator stripped the plastic coupling inside so I decided to replace the entire agitator assembly.

I installed the coupler and tightened the bolt with an adjustable wrench. Then I aligned the agitator and snapped it onto the coupler. Then I snapped the fabric softener dispenser onto the agitator. All of this took less than 3 minutes and that includes putting the wrench back into the tool box.

I pulled the agitator off of the coupler and out of the machine. I moved the coupler in circles by hand to check to see if it was working properly. It wasn't. I got an adjustable wrench and removerd the bolt that held the coupler on. I pulled the coupler out of the wash basin and examined it. I saw that it was stripped out and I new I had to get a new one. I first called my local sears store to see if I could get the parts. First I spent about 20 minutes tied up in their phone system and then when I finally got to speak to an actual person they didn't have a clue. Then somehow I got transferred to the Sears 1-800- phone number and spent about 20 minutes talking with a parts person. Meanwhile I checked out partsselect.com while I was speaking with the Sears rep. It turns out that Sears wanted about $25 more for the parts than parts select and I was only placing a $50 order. When I brought this to the attention of the sales rep. they replied that they were shipping only GE repair parts. Big Deal. The parts that I got from parts select were the exact parts that I took out of the washer. Ordering online was very easy and convenient and I wasn't overcharged for shipping. The repair took less than 3 minutes and everything works like new. Thank you parts select.

Help other customers find the most helpful instructions.

Were these instructions helpful?

53 of 81 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsSocket set

CustomerRebecca from Lititz PA

Agitator was floating up off of base during washing

Removed agitator. Removed small bolt holding mounting device. Removed mounting device. Replaced everything in reverse order with new parts. No problems.

Help other customers find the most helpful instructions.

Were these instructions helpful?

21 of 29 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsSocket set

CustomerDiane from Zebulon GA

Agitator in washing machine not moving

First, I removed the liquid softner dispenser cup from the agitator. Next I gripped the bottom of the agitator and pulled straight up. This was the most difficult part of the repair. Next, I removed the couplier bolt with the appropriate size socket wrench. And then removed the couplier from the transmission shaft. This exposed the shaft. Upon receipt of parts from Part Select, I proceed to install in the reverse order. I slide the new couplier back onto the transmission shaft. and bolted down with new bolt using the original socket wrench. Next I slide on the new agitator making sure the "tongue and groves" matched. Then I placed the liquid softner cup back onto the new agitator. And with great joy my washer is working once more. Thank you Parts Select.

Help other customers find the most helpful instructions.

Were these instructions helpful?

18 of 23 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsSocket set

CustomerEric from Tulsa OK

Agitator is not moving

We couldnt figure out why our clothes werent getting clean until I took the door magnet off and placed it on the sensor so we could watch the washing machine while it was operating with the lid open. The agitator was not moving at all. I put a rope through the fins of the agitator on 2 sides, and using a board for leverage, it popped right off. I used a socket to remove the coupler screw and put on the new parts. Washer works great now. A very easy repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 17 people found this instruction helpful

Parts Used

  • Dual Action Agitator

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMichael from Itasca IL

Blades broken off agitator

Simply put hands, one under each side of the agitaror and pulled up. The part snapped off very easily. I then placed the new part in the tub and pressed down. Extremely easy, should have done it sooner!

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 10 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerTricia from Glen Allen VA

Replace coupling and agitator

unscrewed the old coupling, brushed off yucky build up and replaced, ta da back to washing clothes constantly !

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsSocket set

CustomerLester from Seymour IN

Defective agitator

the parts you sent were same as G.E. parts and fit with very little labor on my part Just follow the directions parts snap right in place washer is good as new thanks for speedy delivery. L. Neal Seymour In.




















thanks for speedy

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 8 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsSocket set

CustomerCARL from SPRING TX

Agitator not working correctly

REMOVED BY PULLING OUT. REMOVED COUPLING AIR BELL WITH SOCKET AND REPLACED. WERY WELL. THNAK YOU.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsWrench set

CustomerAnthony from Santa Clarita CA

Agitator stripped and came off coupling

First I took off the old coupling (one screw). Put the new coupling on, lined up and snapped the new agitator onto the new coupling.
Repair took les than 5 minutes. The longest part of the whole process was lining up the agitator to the coupling.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsSocket set

CustomerBenny from Compton CA

The agitator was not tuning

I had help taking off the old parts,coupling was not easy. But I installed the new parts by my self and I'm 74 years had trouble getting the Agitator Coupling back on, But the straps were easy, Any way I'm back to washing again thanks a bunch

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 13 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsSocket set

CustomerJay from Wickliffe KY

Agitator kept coming off

Removed the bolt holding the agitator coupler on, replaced it and the bolt then slid the agitator on the coupler and the fabric softener dispenser on top of that.... so easy!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Dual Action Agitator

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerKaren from Hamilton NY

Two paddles on the agitator broke off.

After reading how others have done this and how easy it was, I decided to give it a try. And, sure enough, it was really easy. However, one concern I had was on lifting the old agitator off from the axle using both hands. I didn't want to have the agitator come crashing into my face as I pulled up. So I put a pillow on top of the agitator.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 4 people found this instruction helpful

Parts Used

  • Dual Action Agitator

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRobert from Utica NY

Washed my daughter's toys and broke the agitator

Unpacked the agitator from the box. Manually pulled off the old agitator and snapped on the new one. Total repair time was under 2 mins. Much better than a $120 service call.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 12 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsWrench(Adjustable)

CustomerJesse from Ames IA

Fabric softener broken/agitator had one clip broken, too

Was easy to remove the broken parts because they were loose already due to the broken finger in the agitator. It was good that I ordered the coupling kit because the bolt showed corrosion already. With the new parts I was able to see how they all clipped on together so I set myself to unbolted the coupling, install the new coupling, tighten it, alined the agitator to it, pushed into place and,... vuahla!!! fitted and worked like a charm.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-15 of 15